GE Trash Compactor Parts

15 Inch Compactor Bags - 15 Pack

1 Review

Part Number: W10165295RP

These tough Slip-N-Grip plastic compactor bags are used to hold the trash until you are ready to discard of your waste. The bags will fit most 15-inch rectangular compactors including Kenmore, Whirlpool, KitchenAid, and Jenn Air. The compactor bags are white in color and twist ties are included. The bags measure 15-inch wide, 33-inch high and they come in a pack of 15. This is a genuine OEM part.

POWER NUT ASM

1 Review

Part Number: WC02X20287

The power nut is intended for use with trash compactors. The power nut attaches to the side of the ram where it is threaded. When the power screw rotates, it feeds through the power nut which pulls the ram down to compress the trash. If your trash compactor does not stop at the end of the compacting cycle or the ram gets stuck, you may need to replace this part. The power nut is made from plastic and measures approximately 3” long. Please remember to disconnect the power to the trash compactor before starting your repair. This is a genuine OEM part.

Power Nut Kit

Part Number: WP9870163

If your trash compactor ram gets stuck or does not stop at the end of the compacting cycle you may need to replace the power nut. The power nut is intended for use with trash compactors. This part is attached to the side of the ram where it is threaded. When the power screw rotates, it is fed through the power nut which pulls the ram down to compress the trash. This power nut is white in color and made from plastic. Please remember to disconnect the power to the trash compactor before starting your repair.

Frame Roller Assembly

1 Review

Part Number: WC17X20084

15 Inch White Plastic Compactor Bags - 60 Pack

Part Number: W10165294RB

The tough Slip-N-Grip white plastic compactor bags are designed to prevent the bag from slipping down in to the compactor and come in a pack of 60. The compactor bags hold the compacted trash until you are ready to dispose of it. These bags measure 16” wide by 32” high and will fit most 15” rectangular compactors. This is a genuine OEM part.

Trash Compactor Drawer Roller

1 Review

Part Number: WC02X20110

The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.

RETURN SWITCH

1 Review

Part Number: WC21X20249

This part reverses the motor direction when the trach compactor has reached the top of the drawer. If the cycle is not being completed properly, shut off, or makes loud noises, the top limit directional switch may need to be tested by using a multimeter to test the continuity. If there is no electrical path in the switch, it will need to be replaced.

18 Inch Compactor Bags - 60 Pack

Part Number: W10165293RB

Used for trash compactors.

Compactor Bags - Package of 12

Part Number: WC60X5017

The white plastic compactor bags are used to hold the trash until it is ready for disposal. The bags come in a pack of 15. This is a genuine OEM part.

Drive Gear

Part Number: WC22X20111