KitchenAid Cooktop Parts

Surface Burner Plug-In Block Kit

4 Reviews

Part Number: 330031

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Drip Bowl - 6 Inch

7 Reviews

Part Number: W10196406RW

This six-inch chrome drip bowl is intended for use with rolled terminal-style plug in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Drip Bowl - 8 Inch

Part Number: W10196405RW

This eight-inch chrome drip bowl is intended for use with rolled terminal style plug-in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Knob - Chrome

9 Reviews

Part Number: WP7737P245-60

This surface burner knob is a little over 1 1/2 inches in diameter. It is a chrome in color and accepts a D shaped shaft. This part lets you control the amount of heat coming from the burner element or the speed of the cooktop fan. The knob is a genuine OEM part, made entirely of plastic and is sold individually.

Surface Burner - 8 Inch - 2600W

Part Number: WP660533

This 8” plug in style surface burner element provides heat to the cooking surface of your range. The burner element has looped terminal ends, 2600 watts, and a 5-turn. If the burner element is not heating it could be the element or the burner switch. You can use a multimeter to test the element or the switch for continuity. This is a genuine OEM part; the manufacturer recommends replacing the burner receptacle when you replace the surface burner element. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. This part is sold individually.

Knob Skirt - Black

1 Review

Part Number: W10854242

The grommet is used to form a seal between the control knob and the cooktop. By creating the seal, it prevents any liquids from dripping/spilling down underneath the cooktop. The grommet is black in color, made of rubber and measures approximately 1 1/2” in diameter. This part is sold individually and is a genuine OEM part.

Temperature Sensor

2 Reviews

Part Number: WPW10131825

The temperature sensor, also known as an oven probe, detects the temperature within the oven cavity. This temperature sensor is a genuine OEM part. If your oven is too hot, not heating evenly, has little to no heat when baking, or is flashing F3/F4 error messages on your control board, you may need to replace the temperature sensor. Please make sure to disconnect the power to your range before starting your repair.

Cooktop Cleaner

Part Number: W10355051

This cooktop cleaner will cut through tough grease and baked-on residue. The cleaner will leave a protective coating of silicone on the cooktop surface as it cleans. This 10oz bottle is safe for all glass, porcelain, and ceramic cooktops. Just apply a small amount to your cooktop and use a circular motion by using a sponge or a rag and gently press until the grease or baked residue has been removed. Please remember to wear gloves to protect your hands while working with the cooktop cleaner.

Surface Burner Knob

2 Reviews

Part Number: WP3191922

This genuine OEM surface burner knob is 2” in diameter. The surface burner knob lets you control and adjust the amount of heat coming from the burner element. The knob is black in color, is made entirely of plastic, and will accept a 'D' shaped shaft. It is sold individually.

Burner Knob - Stainless Color

5 Reviews

Part Number: WP7733P410-60

This surface burner knob is approximately 2” in diameter. It is a stainless-steel knob, accepts a D-shaped shaft, and has black numbering indicating the temperature level of the surface burner: low, high, and off. The burner knob allows you to control the amount of heat coming from the burner element. The knob is a genuine OEM part, made entirely of plastic and is sold individually.