YOUR ORDER SHIPS THE SAME DAY
On in-stock orders placed
before 4pm Eastern Time.

VIEW CART

1-866-895-9295 Mon-Fri 7am to 1am ET Sat-Sun 7am to 11pm ET

Detailed View

388034-1-S-Whirlpool-80040             -Agitator Directional Cogs
388034-1-S-Whirlpool-80040             -Agitator Directional Cogs http://www.easyapplianceparts.com/Schematics/Whirlpool/Whirlpool_Thumb/MDKTWLBF.gif

Agitator Directional Cogs

EAP Number: EAP388034
Manufacturer: Whirlpool
Part Number: 80040

These Whirlpool agitator directional cogs come four to a package. They are commonly referred to as dog ears, and are usually used with direct drive washing machines. These cogs are white and beige in color, made from rubber and are approximately 1 inches in length.

EAP #:

EAP388034

Compare At:

$4.91

You save:

$2.20

Your Price

$2.71

Expert Repair Guide

  1. To replace the agitator directional cogs, remove power from the washer.
  2. If your washer has a fabric softener dispenser, it should just pop off by apply pressure upwards.
  3. Below the cap is a seal assembly, needle nose pliers maybe require to help you remove this, it should also just be pulled upward.
  4. You’ll now have access to the nut that needs to be removed, so you can pull the barrel of the agitator out of the washer.
  5. Once you remove the barrel, simply turn it upside down carefully and the cam and cog assembly will fall out.
  6. Remove the clip that holds the cogs in place then remove all the cogs and replace them with the new cogs.
  7. Reinstall the clip and place the assembly back in the agitator barrel.
  8. Place the barrel back in the washer, reinstall the nut and seal.
  9. Pop the fabric softener cup back in place, by applying firm pressure and then restore power to the washer.

We Guarantee...


ABOUT SSL CERTIFICATES

1-866-895-9295

Monday - Friday 7am to 1am ET
Saturday - Sunday 7am - 11pm ET
Contact Us