Admiral Washer ATW4475TQ0
Repairing your ATW4475TQ0 Admiral Washer is simple with official replacement parts made to fit your model. View a selection of popular parts, or review parts lists for each of the
ATW4475TQ0 model diagrams below. Trust us to help you find the part you need and get your
ATW4475TQ0 Admiral Washer running again.
Diagrams for Admiral ATW4475TQ0 Washer
There are 8 diagrams for ATW4475TQ0. Click on the diagram where you think your part is located.
Most Popular ATW4475TQ0 Parts
These are the most commonly purchased repair parts for ATW4475TQ0.
-
(2)
This suspension spring is used to support and balance the outer tub of your washer. If the spring is broken it will cause the washer to be off balance and noisy. Check your model to see how many springs are required for your model. The spring is sold individually.
-
(9)
The newer version of the coupler kit is made with new metal sleeves for added strength. This part is located between the motor and transmission on the direct drive washer that does not have a belt. The coupler will break to protect the motor from damage if the drive motor system seizes up. If your washer will not fill, will not agitate or spin, but it will drain the water from the tub, you may need to replace this part because it has failed. This is a genuine OEM part. Disconnect the power to your washer before starting the repair.
-
(9)
The clutch assembly is used on direct drive washing machines and helps spin the basket during the spin cycle to remove water from the tub. If your clutch is worn out it can cause the washer to be noisy or leave water in the tub because it won’t drain properly, which will leave your clothes soaked. The clutch assembly includes a brake cam driver, retaining ring, bearing, and a spring, depending on your model number. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the washer before starting your repair.
-
(10)
The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire.
-
(5)
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
-
This is used in your direct drive washer that has a neutral drain.