BADMODEL1 Frigidaire Dishwasher Parts List

Dishwasher bottom door gasket (dishwasher bottom door gasket and deflector strip. If the dishwasher is leaking the gasket may be damaged.)

This gasket goes on the bottom of the dishwasher door to create a tight seal between the tub and the outer edge of the door. If the gasket is cracked or broken, it will need to be replaced to keep water from leaking out on to the floor. The gasket is approximately 23” long and is a genuine OEM part. It is recommended that once you have installed the gasket to leave the door closed for a few hours to make sure the gasket is properly sealed.

Lower rack assembly - grey (lower dishwasher dishrack assembly.)

This part is a genuine OEM part. This white lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dish washing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.

Lower spray arm (spray arm assembly, lower)

Dishwasher tub gasket - gray (dishwasher door gasket (or door seal). This door gasket creates a seal around the dishwasher to prevent water from leaking out. If the gasket is torn,)

The door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This gray door gasket is made of rubber and is a genuine OEM part.

Silverware basket (gray silverware basket)

This is a basket for washing flatware or silverware in your dishwasher. It is located on the lower rack. If your silverware basket is damaged or worn out, you should replace it. The basket comes with three sections and includes the covers. No tools are required for this repair. This is a genuine OEM part.

Door latch and gasket (dishwasher door latch and gasket kit, black. The door latch keeps the dishwasher door securely closed. If the door latch is broken, the dishwasher won)

Black in color. No longer available in almond. This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.

Water inlet valve - 120v 60hz (dishwasher water inlet valve. The water inlet valve supplies water to the dishwasher. If the water inlet valve is defective, the dishwasher may not fi)

This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner of the front of your dishwasher. The attaching solenoids on the valve open and close to release the desired amount of water needed in your dishwasher. If your dishwasher is leaking, will not fill with water, is not draining, or not cleaning the dishes properly, you may need to replace the water inlet valve. This valve has 120 volts and 60 Hz. Please be sure to disconnect the power to your dishwasher before starting your repair. This water inlet valve is a genuine OEM part.

Single rack roller kit (lower dishwasher dishrack roller and axle kit. The dishrack rollers enable the dishrack to roll in and out of the dishwasher.)

This wheel and axle assembly is located on the lower dishwasher rack to allow you to roll the rack in and out easily. They are sold individually and eight are usually required for your model. This part is white in color, made of plastic and is sold individually. This is a genuine OEM part.

Rack assembly upper (dishwasher upper rack assembly.)

The upper dishrack is used to hold your dishes in place while the dishwasher goes through the wash cycles. Over time the dishrack can become damaged, start to rust, or be missing rollers, and the dishrack will need to be replaced. This rack is white in color with light gray rollers and measures approximately 23 Inch x 23 Inch. This is a genuine OEM part.

Heating element brass nut (dishwasher heating element mounting nut.)

The heating element nut is used to install and secure the heating element in your dishwasher. If your dishwasher is leaking you may need to replace the nut. The manufacturer suggests replacing replace both nuts at the same time. This heating element nut is a genuine OEM part and is sold individually.

Door spring

Sold Individually.

Detergent and rinse dispenser with cap (dishwasher detergent and rinse dispenser assembly with cap. If the dispenser does not release the detergent properly it may be defective.)

The manufacturer has redesigned this part and it may appear different than the original, but will have the same functionality. This part releases the detergent and rinse aid into the dishwasher.

Lower spray arm support (lower wash arm support)

Wheel&bushing asy, upper,black (upper rack wheel)

The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely of plastic, and are white in color. The purpose of these parts is to allow your dishrack to roll easily on the support rails. This kit is sold individually and contains only one wheel and one axle. Please order the required quantity for your repair. If your dishrack is having trouble rolling in and out you may need replace your rollers and axles.

Lower rack bracket (bracket, fence fold down, lower rack)

This white lower rack bracket is a little over an inch long. Sold individually.