Most Popular Parts
These are the most commonly purchased repair parts for LDF7932ST.
-
(2)
The door hinge cable works in conjunction with the dishwasher door by connecting the door hinge to the door spring and helping to support and balance the weight of the door as you open and close it. If your dishwasher door isn’t closing properly you will need to replace this part. This part measures approximately 12” and is black and white in color. This is a genuine OEM part.
-
(1)
The lower rack roller and axle attaches to the rack and allows you to slide the lower dish rack in and out smoothly. If a roller becomes damaged or broken it will need to be replaced. This part measures approximately 2 1/2” in diameter, gray in color, made from plastic, and is sold individually. This is a genuine OEM part.
-
(1)
The diverter motor works in conjunction with the spray arms in your dishwasher by controlling the flow of water to the spray arms. The motor turns the check valve inside the pump to avert the flow of water between the drain pump and the spray arms. If the motor fails it will cause the dishwasher not to wash or drain and will need to be replaced. This diverter motor is 120 volts and 60 Hz. Please remember to disconnect the power and water supply to the dishwasher before starting the repair. This is an authorized OEM part.
-
-
This replacement dishwasher drain hose connects the drain pump to the air gap or the garbage disposal to drain the water from the dishwasher. The hose is gray in color and made of plastic. If the drain hose becomes cracked or damaged it will cause a water leak and will need to be replaced. This is a replacement drain hose from the manufacturer. The manufacturer advises that if the drain hose that is being replaced does not have the vent tube going to the water inlet assembly, a new water inlet will need to be purchased. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.
-
The circulation pump mesh filter is used in your dishwasher to avoid food particles from entering the pump during the wash cycle and prevent the pump from getting clogged. The filter also helps support the lower spray arm. If the mesh filter gets torn or clogged beyond cleaning, it will cause the dishwasher to have dirty water or low water pressure and will need to be replaced. The filter measures 10” in diameter. This is a genuine OEM part. Please remember to shut off the power and water supply before starting the repair.