Whirlpool Washer WTW5000DW1
Repairing your WTW5000DW1 Whirlpool Washer is simple with official replacement parts made to fit your model. View a selection of popular parts, or review parts lists for each of the
WTW5000DW1 model diagrams below. Trust us to help you find the part you need and get your
WTW5000DW1 Whirlpool Washer running again.
Diagrams for Whirlpool WTW5000DW1 Washer
There are 6 diagrams for WTW5000DW1. Click on the diagram where you think your part is located.
Most Popular WTW5000DW1 Parts
These are the most commonly purchased repair parts for WTW5000DW1.
-
(4)
This suspension rod kit is a genuine OEM replacement kit that is compatible with various models of washing machine. The kit is responsible for supporting the inner tub of the washing machine and absorbing any excessive vibrations and movement caused during the washing and spinning cycles. This helps to protect the tub and interior of the washer from damage. If the suspension rods in your washer are faulty, you will likely notice loud banging, knocking, or scraping sounds as the tub makes contact with the washer cabinet. Each kit includes four suspension rods and springs as well as the suspension ball cups. It is advised you replace all suspension rods at the same time, as they tend to wear at similar rates.
-
(1)
The transmission drives the agitator and spins the basket in the washer. Possible Repair Solution For: Not washing properly, will not agitate, pumps but will not spin.
-
(9)
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to your parts diagram for a complete list of parts included.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
-
(2)
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces.
-
(2)
-
(7)