Amana Range Parts

Amana Range Parts
Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?
Amana Range Parts

Popular Amana Range Parts

Shop By Appliance Type
Drip Bowl - 6 Inch – Part Number: WPW10196406

Drip Bowl - 6 Inch

17 Reviews

Part Number: WPW10196406
This six-inch chrome drip bowl is compatible with electric ranges that utilize plug-in surface burners. This bowl measures approximately 7 2/3-inch in diameter. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.
Easy Part #:
EAP11750108
Availability:
In Stock
Your price
$6.59
Chrome Drip Bowl - 8 inch – Part Number: WPW10196405

Chrome Drip Bowl - 8 inch

9 Reviews

Part Number: WPW10196405
This eight-inch chrome drip bowl is intended for use with rolled terminal style plug in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.
Easy Part #:
EAP11750107
Availability:
In Stock
Your price
$7.26
Light Bulb - 40W – Part Number: 8009

Light Bulb - 40W

11 Reviews

Part Number: 8009
This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.
Easy Part #:
EAP884734
Availability:
In Stock
Your price
$11.10
Double Sided Tape – Part Number: WP74009014

Double Sided Tape

2 Reviews

Part Number: WP74009014
Part differ in appearance or color, but functions same as original.
Easy Part #:
EAP11744277
Availability:
In Stock
Your price
$6.43
Surface Burner Element Switch, Large Burner – Part Number: WP3149400

Surface Burner Element Switch, Large Burner

11 Reviews

Part Number: WP3149400
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.
Easy Part #:
EAP11740783
Availability:
In Stock
Your price
$53.17
Dual Element Control Switch – Part Number: WPW10434452

Dual Element Control Switch

5 Reviews

Part Number: WPW10434452
This switch controls the stove top surface burner.
Easy Part #:
EAP11754687
Availability:
In Stock
Your price
$68.89
Surface Burner Plug-In Block Kit – Part Number: 330031

Surface Burner Plug-In Block Kit

4 Reviews

Part Number: 330031
This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.
Easy Part #:
EAP340571
Availability:
In Stock
Your price
$11.12
Oven Sensor – Part Number: WPW10181986

Oven Sensor

4 Reviews

Part Number: WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperature. The sensor detects the temperature in the oven cavity. If the following symptoms occur, replacing the temperature sensor could be the solution: Little or no heat when baking, oven not heating evenly, oven will not start, and/or oven is overheating. Often, if the sensor is defective, the oven temperature will fluctuate and be inaccurate by more than 50 degrees. The tool needed for this replacement is a #2 square head screwdriver or a #2 Philips screwdriver. Remember to unplug the range before installing the part.
Easy Part #:
EAP11749737
Availability:
In Stock
Your price
$85.19
Oven Bake Element – Part Number: WPW10308477

Oven Bake Element

10 Reviews

Part Number: WPW10308477
This Whirlpool OEM 2400-watt bake element has push-on terminals and is located on the bottom of the oven cavity. The bake element supplies heat while baking. If the oven is not heating properly the bake element may have burned out. If the element has burned out there would be visible damage such as holes, cracks, or blisters. When replacing the element, do not allow the wires to fall back through the rear of the oven. Disconnect the power to the range before starting your repair.
Easy Part #:
EAP11752501
Availability:
In Stock
Your price
$42.89
Bake Element – Part Number: WP74010750

Bake Element

12 Reviews

Part Number: WP74010750
This genuine OEM bake element has push-on terminal ends and provides heat while baking. If the bake element has arcing, is shorted out, the oven is not heating evenly, or little or no heat when baking, you may need to replace it. When replacing the bake element please make sure you disconnect the power to the range. Make sure you do not let the wires fall back through the rear of the oven. This element has been updated by the manufacturer. New installation screws are required and are sold separately.
Easy Part #:
EAP11744404
Availability:
In Stock
Your price
$35.76
View more Back to top