Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site
Amana Range
Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?

Amana Range Switches

Surface Burner Element Switch, Large Burner – Part Number: WP3149400

Surface Burner Element Switch, Large Burner

11 Reviews

Part Number: WP3149400

This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch controls the heat of the surface burner. Disconnect power to your range before completing this repair because you will be working closely with electrical circuits. Remove the screws from back panel and the console, and remove the console to expose the switch. It is recommended to check for overheating or arcing on the wiring harness in case they need to be replaced as well. The harness that connects to the switch features a slip-on terminal for easy installation.

Easy Part #:

EAP11740783

Availability:

In Stock - Ships Today

Your price

$57.82

Dual Element Control Switch – Part Number: WPW10434452

Dual Element Control Switch

5 Reviews

Part Number: WPW10434452

This switch controls the stove top surface burner.

Easy Part #:

EAP11754687

Availability:

In Stock - Ships Today

Your price

$61.22

Infinite Control Switch, 6" – Part Number: WP3149404

Infinite Control Switch, 6"

Part Number: WP3149404

This switch controls the stove top 6" surface burner.

Easy Part #:

EAP11740785

Availability:

In Stock - Ships Today

Your price

$45.13

Range Infinite Burner Switch - 8 Inch – Part Number: WP7403P239-60

Range Infinite Burner Switch - 8 Inch

2 Reviews

Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Easy Part #:

EAP11744487

Availability:

In Stock - Ships Today

Your price

$47.77

Infinite Switch - 6 Inch – Part Number: WP3148952

Infinite Switch - 6 Inch

2 Reviews

Part Number: WP3148952

This part carries 5.2-6.6 amps.

Easy Part #:

EAP11740774

Availability:

In Stock - Ships Today

Your price

$66.95

Dual Surface Burner Switch Kit – Part Number: 12002125

Dual Surface Burner Switch Kit

1 Review

Part Number: 12002125

This switch is used to operate the dual surface burner.

Easy Part #:

EAP2003583

Availability:

In Stock - Ships Today

Your price

$80.05

Infinite Switch - 8 Inch – Part Number: WP74010824

Infinite Switch - 8 Inch

Part Number: WP74010824

Sold individually.

Easy Part #:

EAP11744412

Availability:

In Stock - Ships Today

Your price

$61.33

Surface Element Switch – Part Number: W10900107

Surface Element Switch

Part Number: W10900107

Easy Part #:

EAP12070192

Availability:

In Stock - Ships Today

Your price

$35.30

Dual Surface Burner Switch – Part Number: WP74003122

Dual Surface Burner Switch

Part Number: WP74003122

This part has been updated by the manufacturer. This updated part now has 7 wire terminals instead of 5. The terminals are all labeled, however, the new switch needs to be tested before connecting the pilot lamp wire (P). To test the new switch: 1) Connect the Line Wires (L1 and L2), connect the Load Wires (H1 and H2). 2) Do not connect the pilot lamp (P) wire yet. 3) Reconnect the power to the range and turn on the new switch and one other switch. 4) Connect the leads of a volt meter on L1 of the new switch and P of the other switch you turned on. 5) If the volt meter reads 220V, the L1 and L2 wires on the new switch must be reveresed. 6) Disconnect power, reverse Line Wires if needed and connect the P wire. 7) Reconnect power to the range after reassembly.

Easy Part #:

EAP11744018

Availability:

In Stock - Ships Today

Your price

$53.37

Infinite Dual Switch – Part Number: WPW10149355

Infinite Dual Switch

1 Review

Part Number: WPW10149355

Easy Part #:

EAP11749068

Availability:

In Stock - Ships Today

Your price

$120.01

Amana Range
1-877-910-4617
Daily 8am to 9pm EST
Contact Us