GE Range Parts
Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?

GE Range Parts

40WATT 15AMP INCANDESCENT BULB – Part Number: 40A15

40WATT 15AMP INCANDESCENT BULB

Part Number: 40A15

Easy Part #:

EAP217532

Availability:

In Stock

Your price

$10.99

Light Cover – Part Number: WB36X192

Light Cover

Part Number: WB36X192

The oven bulb lens cover is made of glass and is approximately 2.75 inches in diameter. The lens cover protects the light bulb from being damaged. If the lens is cracked, damaged, or missing it will need to be replaced. It is suggested to make sure that the lens cover is cool to the touch before you start this repair. To remove the bulb lens cover simply slide the retaining clip off and then remove the lens. Replace it with a new cover and slide the retaining clip back on to hold it into place. This is an OEM part sourced from the manufacturer.

Easy Part #:

EAP247415

Availability:

In Stock

Your price

$5.98

Door Bumper - Black – Part Number: WB2K15

Door Bumper - Black

(3)

Part Number: WB2K15

The oven door bumper is used to protect the exterior of the oven when the door is closed. By installing the door bumpers, it will prevent the drawer door from rubbing against the cabinet. If one breaks or goes missing you will need to replace the bumper. This part is black in color, made of rubber, and is sold individually. This is a genuine OEM part.

Easy Part #:

EAP241365

Availability:

In Stock

Your price

$3.16

Temperature Sensor – Part Number: WB21X22134

Temperature Sensor

(4)

Part Number: WB21X22134

The temperature sensor detects the temperature within the oven cavity. If your oven is too hot, not heating evenly, or has little to no heat when baking, you may need to replace the temperature sensor. The sensor is usually located in the back of the oven. This is a genuine OEM part. Please make sure to disconnect the power to your range before starting your repair.

Easy Part #:

EAP10059162

Availability:

In Stock

Your price

$13.70

Flat Style Oven Igniter Kit – Part Number: WB13K21

Flat Style Oven Igniter Kit

(6)

Part Number: WB13K21

The flat style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, then your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter please be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3-3/4" in length and the amperage range is 3.3 to 3.6. The kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. This is a genuine OEM part.

Easy Part #:

EAP231280

Availability:

In Stock

Your price

$52.48

Bake Element - 220V  2300W – Part Number: WB44X5082

Bake Element - 220V 2300W

(3)

Part Number: WB44X5082

This closed-hinged style bottom bake element is located on the bottom of the oven cavity to supply the heat for baking. This bake element has screw-on wire terminals is 18 1/4-inch wide and 14 1/2-inch deep to mounting flange and the terminal ends extend 2 1/2-inch past the flange. The element is 2300 watts and 20 volts. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Easy Part #:

EAP249466

Availability:

In Stock

Your price

$45.18

Round Style Oven Igniter – Part Number: WB2X9154

Round Style Oven Igniter

(5)

Part Number: WB2X9154

The round style oven igniter ignites the gas to light the oven burner to produce heat for your range. The igniter measures approximately 3 1/2” in length and the amperage range is 2.5 to 3.0. If the element has shorted out, no longer glowing, or glowing but only orange or red when it needs to be white, you will need to replace the oven igniter. When replacing the igniter please be very careful not to touch the gray element part of the igniter as it is very fragile. This igniter can replace igniters for either the broil or bake burners; it does not replace the flat-style igniters. The igniter includes two high-temperature wire connectors. This is a genuine OEM part. Please make sure to disconnect the power and shut off the gas supply before starting your repair.

Easy Part #:

EAP243425

Availability:

In Stock

Your price

$70.32

Bake Element - Push On Terminals - 240V – Part Number: WB44T10011

Bake Element - Push On Terminals - 240V

(6)

Part Number: WB44T10011

The bake element provides heat for baking and is located on the bottom of the oven. This part measures approximately 20-inch in length, 18-inch wide and is made of metal. If your bake element has shorted out, has arcing, makes the oven too hot, is not heating properly or has little to no heat, you may need to replace it. You can use a multi meter to test the bake element for electrical continuity to see if you need to replace it. Please remember to disconnect the power before starting your repair. This is a genuine OEM bake element.

Easy Part #:

EAP249286

Availability:

In Stock

Your price

$60.05

Broil Element – Part Number: WB44X173

Broil Element

(2)

Part Number: WB44X173

The broil element is located on the roof of the oven cavity to supply heat for broiling. The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart. The mounting bracket is not included with the element. If the element is no longer heating or it has shorted out, then you will need to replace your broil element. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP249411

Availability:

In Stock

Your price

$30.76

Oven Rack – Part Number: WB48T10095

Oven Rack

Part Number: WB48T10095

This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. This is a genuine OEM part and is sold individually. Please order quantity needed.

Easy Part #:

EAP6447646

Availability:

In Stock

Your price

$55.00

GE Range Parts

ABOUT SSL CERTIFICATES
1-877-910-4617
Daily 8am to 10pm ET
Contact Us