GE Trash Compactor Parts

Compactor Bags - 15 pack

Part Number: WC60X10005

The white plastic compactor bags are used to hold the trash until it is ready for disposal. The bags come in a pack of 15. This is a genuine OEM part.

Drive Gear Kit

Part Number: WC36X5071

This 8-piece ram drive kit works in conjunction with your trash compactor by helping the drive motor power the compacting ram. When the drive gear is broken, damaged, or noisy, we suggest replacing it right away to avoid causing any more issues with your trash compactor. The kit includes the gears, retainer clip, washers, ram cam, and ram stop. This is a genuine OEM kit. Please remember to disconnect the power to your trash compactor before starting the repair.

NUT POWER ASM

(1)

Part Number: WC01X20127

The power nut is intended for use with trash compactors. The power nut attaches to the side of the ram where it is threaded. When the power screw rotates, it feeds through the power nut which pulls the ram down to compress the trash. If your trash compactor does not stop at the end of the compacting cycle or the ram gets stuck, you may need to replace this part. The power nut is made from plastic and measures approximately 3” long. Please remember to disconnect the power to the trash compactor before starting your repair. This is a genuine OEM part.

Compactor Bags - 10 Pack

Part Number: WC60X5015

Trash Compactor Drawer Roller

(1)

Part Number: WC02X20110

The drawer roller attaches to the bottom of the drawer and allows the drawer to roll in and out.

Gear Box Kit

(1)

Part Number: WC22X5028

The gearbox in the trash compactor is used to pivot the chain that drives the sprocket that raises and lowers the compactor ram. If your trash compactor is not compacting or making grinding noises you may need to replace the gearbox. To replace the gearbox, you will need to disconnect the power supply, uninstall the compactor from the cabinet and disassemble the drawer. This part measures approximately 7” long and is made of metal. This is a genuine OEM part.

Drive Gear - White

Part Number: WC22X10005

This part is located at the bottom of your compactor and helps the drive motor power the compacting ram. If the drive gear is broken or damaged, we suggest replacing it right away to avoid causing any more issues with your trash compactor. The drive gear is white in color and made from plastic.

15 Inch Compactor Bags - 15 Pack

Part Number: W10165295RP

These tough Slip-N-Grip plastic compactor bags are used to hold the trash until you are ready to discard of your waste. The bags will fit most 15-inch rectangular compactors including Kenmore, Whirlpool, KitchenAid, and Jenn Air. The compactor bags are white in color and twist ties are included. The bags measure 15-inch wide, 33-inch high and they come in a pack of 15. This is a genuine OEM part.

Drive Motor and Gear Kit

(1)

Part Number: WC26X10006

The drive motor and gear kit operate the trash compactor press which helps compact the trash. When in use, the drive motor will activate the press, by turning the gears and a chain, that will lower into the trash, compact it and then raise back up. If your compactor is noisy or not compacting you may need to replace the motor. This kit includes the motor, drive gear, jumper harness, and is a genuine OEM part. Please remember to disconnect the power to the trash compactor before starting the repair.