General Electric Washer Bearings

Drum Bearing Slide - Green

1 Review

Part Number: WE1M1067

This single green drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum won?t tumble you many need to replace the slides. The manufacturer recommends replacing both slides at the same time. There are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect the power to the dryer before starting your repair.

Split Ring

1 Review

Part Number: WH02X10265

This split ring is two inches in diameter.

Tub Bearing Washer

Part Number: WH2X1197

The tub bearing washer goes between the transmission and the tub bearing in your washer. This part helps to keep the inner tub spinning smoothly during operation. If your washer is noisy you may hear the bearing wearing on the transmission and the tub bearing washer will need to be replaced. This part is gray in color and measures approximately 2” in diameter. This is a genuine OEM part. Please disconnect the power and water supply to the washer before starting this repair.

Tub Bearing

1 Review

Part Number: WH2X1198

This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you may need to replace the tub bearing. This bearing is made of metal, and is approximately 3 inches wide and 2 inches tall.

Rear Bearing Shaft Support

Part Number: WE13X10011

BEARING

Part Number: WH4X107

BEARING

Part Number: WH4X110