Hotpoint Refrigerator Valves

Dual Inlet Water Valve

1 Review

Part Number: WR57X10051

This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.

Water Valve

1 Review

Part Number: WR57X10070

This part releases water from the supply line when it's activated.

Single Outlet Valve Kit

3 Reviews

Part Number: WR57X10033

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making/dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall and make sure to disconnect both the water and power supply before starting your repair. As per the manufacturer, this valve has a new quick connection. You must cut the retaining nut off your current plastic water line, and gently push it into the new valve.

Icemaker Water Inlet Valve

1 Review

Part Number: WR57X10086

This part releases water from the supply line when it's activated.

Primary Water Inlet Valve

1 Review

Part Number: WR57X10023

This part has one port and 2 solenoids and comes with a mounting bracket. The water valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold.

Water Valve and Bracket Assembly

Part Number: WR57X10026

This water valve assembly has been redesigned. It has a new quick connect style valve. To install: Cut original plastic nuts off tubing and gently push into valve until they stop. No other nuts or connectors needed.

Secondary Water Inlet Valve

Part Number: WR57X10024

*Please note, this part is a substitute from the original. The valve is a new quick connect. No nuts or connectors are needed, just cut the old nuts off of the tubing and gently push them into the valve.

Water Valve Conversion Kit

Part Number: WR49X10043

This kit comes with the primary and secondary valves, tubing, connectors and brackets. ***NOTE: The wheels shown in the pictures are NOT included with this kit.

Double Outlet Water Valve

Part Number: WR57X88

This double outlet valve has a garden hose thread for a tubing adapter, and is intended for use with refrigerators that have icemakers that make round ice cubes.

Water Valve Kit

Part Number: WR57X10052