Ice Maker Hoses and Tubes

Ice Maker Water Fill Tube Kit

2 Reviews

Part Number: WP2196157

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Water Tube Kit

1 Review

Part Number: W10823511

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Ice Maker Water Distributor Tube

Part Number: W10863947

The water distributor tube distributes water from the reservoir to the evaporator plate.

Plastic Tubing

Part Number: WPB5705307

The water supply tubing is made of plastic and goes between the water inlet valve and the ice maker inlet tube. The tubing is 8 1/2 feet long and 1/4” in diameter. The water supply tubing transports water to the ice and water dispensers. If there is no water going to the ice maker, the refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace the water supply tubing. This is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Compression Nut

1 Review

Part Number: WP627018

This single 1/4-inch compression nut is used to connect the lines that supply water to the correct components, the water dispenser and the ice maker, with the plastic water line of the icemaker assembly. This is a genuine OEM part. Please remember to disconnect the power and water supply to the refrigerator before starting your repair.

Tube

1 Review

Part Number: WPW10217922

Refrigerator Ice Maker Fill Tube

Part Number: W11176463

This fill tube elbow is almost eleven inches long. It is all white in color and is made of plastic. It is used with the icemakers of some refrigerators.

Plastic Tubing Inserts - 4 Included

Part Number: 4387491

These inserts are used with 1/4 inch plastic tubing.

Water Line - 1/4"

Part Number: WR17X1948

The ice maker water line is used to direct and supply water to the ice maker during the fill cycle. This waterline is located on the back wall of your refrigerator/freezer, is made of plastic and is 1/4” in diameter. If the water line becomes damaged it could cause water to leak on the floor and the tubing will need to be replaced. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Plastic Tube Insert

Part Number: WPA3223101

Sold individually.