Jenn-Air Cooktop Switches

Surface Burner Switch

2 Reviews

Part Number: W11088181

This is the replacement surface burner switch for your range. It measures approximately 1.5 inches by 1.5 inches, with a shaft that is approximately 1 inch long. The surface burner switch turns the surface element on and off and allows you to control how much heat the element produces. The main reason to change the infinite switch is if the switch has shorted out inside, and is not allowing power to the burner, or if the contacts inside are stuck together and the element is stuck on high. Ensure that the burner is off, and the range has been disconnected from the power source before you begin this repair. This part is sold individually and is an OEM part.

Range Infinite Burner Switch - 8 Inch

2 Reviews

Part Number: WP7403P239-60

This infinite switch for eight inch range burners is almost three inches long. This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Dual Surface Burner Switch Kit

1 Review

Part Number: 12002125

This switch is used to operate the dual surface burner.

Surface Element Switch

Part Number: W10900107

Surface Unit Infinite Switch Kit

3 Reviews

Part Number: 700855K

This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.

Dual Burner Infinite Switch Kit

1 Review

Part Number: 12002121

Right Front

Igniter Switch

Part Number: WP4330739

The igniter switch is used on a gas range/oven. When the gas burner valve knob is depressed and turned, the switch creates a spark that lights the gas and starts the burner. If the burner will not ignite you may need to replace your switch. Please remember to disconnect power to your range before starting your repair. The igniter switch is sold individually.

Surface Burner Switch

Part Number: WP74011242

Spark Ignition Valve Switch

2 Reviews

Part Number: WPY704512

This spark ignition valve switch is an inch and a half long. It is a white switch with a black cam. Sold individually.

Inifinite Switch

Part Number: WPW10234425