Jenn-Air Dryer Parts
Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?

Why do we need your model number?

Every model has its own, specific solutions. If you go to a car mechanic they'll need to know the exact make and model of your car to find the right repair parts. Appliances are the same. See this guide for help.

Jenn-Air Dryer Parts

Multi Rib Belt - 92-1/4"

(8)

Part Number: 341241

This dryer drum belt has four ridges, three grooves, 1/4-inch wide and 92 1/4-inch long. The belt helps rotate the drum. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP346995

Availability:

In Stock

Your price

$14.33

M Series New Style Coil Kit

(3)

Part Number: 279834

This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If there is no heat or your drying time is getting longer, the coils may be bad and will need to be replaced. Once the coils go bad they do not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP334310

Availability:

In Stock

Your price

$13.86

Door Catch Kit

Part Number: LA-1003

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close you may need to replace the door catch. This is a genuine OEM part and includes both the male (strike) and female (catch) pieces. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP2162263

Availability:

In Stock

Your price

$14.52

High Limit Kit

Part Number: LA-1053

This kit comes with three separate thermal fuses and is usually used with clothes dryers that have a fan mounted on the motor shaft. Included within this kit is the high limit (Limit: 258), the gas high limit (Limit: 240), and the gas and electric high limit thermostat (Limit: 300).

Easy Part #:

EAP2162282

Availability:

In Stock

Your price

$16.78

Rear Drum Support Roller Kit

Part Number: LA-1008

The rear drum support roller kit includes two drum support rollers, two support shafts, four screws, two spacers, two washers, two retaining rights, and an instruction sheet. If the dryer is making a loud rumbling noise or will not tumble you may need to replace the roller. The drum support roller holds the drum in place while it rotates on the support wheels. Most dryers use two drum rollers, and it is recommended to change both at once. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:

EAP2162268

Availability:

In Stock

Your price

$45.63

Lint Filter

Part Number: WP53-0918

The lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry you may need to replace the filter. This lint filter screen has two side guides on either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. This is a genuine OEM part.

Easy Part #:

EAP11742807

Availability:

In Stock

Your price

$16.50

Radiant Flame Sensor

Part Number: WP338906

This part senses if the igniter is hot enough to ignite the flame for heat, allowing the gas valve to open. The sensor is three inches long and is used for many gas clothes dryers. If your dryer is not creating any heat, taking too long to dry or shuts off too soon, you may need to replace the flame sensor. This is a genuine OEM part and is made of both plastic and metal. Please remember to disconnect power to your dryer before starting your repair.

Easy Part #:

EAP11741429

Availability:

In Stock

Your price

$26.13

Blower Wheel - B/10 Models

Part Number: 31001043

This blower wheel is suitable for some clothes dryers of the 10 and earlier series. Manufactured to fit a 1/2 inch motor shaft, this blower wheel is 3-1/8 inches deep. The diameter of the wheel is 7-1/8 inches, and the spring clamp is not included.

Easy Part #:

EAP2030820

Availability:

In Stock

Your price

$37.59

Blower Wheel Clamp

Part Number: WP312967

The blower wheel clamp is used to hold the blower wheel to the motor shaft. The clamp is less than an inch long and is used with your dryer. If your blower wheel is loose or making a noise while operating, you may need to replace the clamp. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP11740752

Availability:

In Stock

Your price

$6.75

Idler Assembly

Part Number: WP53-2287

Easy Part #:

EAP11742814

Availability:

In Stock

Your price

$39.13