Kenmore Washer Hoses and Tubes

Washer Hose with Bellows

5 Reviews

Part Number: 4738ER1004B

This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillips head screwdriver to complete this repair; a clamp tool can also be helpful. Remove the screws holding the lid of the washer in place, and take off the lid. Locate the dispenser hose and remove its clamps. Place the clamps on the new hose, using the arrows for a guide in positioning the clamps. Install the new hose and reassemble all other parts.

Washer Drain Hose

1 Review

Part Number: W11244231

The drain hose carries used water from the washer to your house drain.

Tub-to-Pump Drain Hose

Part Number: 4738ER1002A

This hose has bellows to allow for flexibility during the wash and spin cycles.

Washer Tub-to-Pump Hose

Part Number: W10899966

The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands

Water Inlet Hose

Part Number: WP3357328

This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.

Drain Hose

5 Reviews

Part Number: WPW10358149

It connects from the pump to the back panel. The clamp is not included.

Faucet Adapter

2 Reviews

Part Number: WPW10254672

This faucet adapter is used with some portable dishwashers and washers to provide a means for draining and filling by connecting a water supply hose to a sink faucet. This part is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This is a genuine OEM part.

Tub-to-Pump Hose Kit

3 Reviews

Part Number: 285871

This kit comes with the clamps.

Tub-to-Pump Hose

3 Reviews

Part Number: AEM73213001

Break Hose

1 Review

Part Number: WP8317926

This hose goes from valve to inlet.