106.52574200 Parts List

Screw (screw with plastic washer 8-18 x 1/2)

This metallic screw is less than an inch long and comes with a plastic washer.

Easy Part #:

EAP11742721

Availability:

In Stock - Ships Today

Price:

$4.50

Ice mold (modular ice maker replacement ice cube mold and heater assembly, flake resistant surface)

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:

EAP11749915

Availability:

In Stock - Ships Today

Price:

$82.13

Water fill cup and bearing (bearing and cup assembly for icemaker)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:

EAP11743318

Availability:

In Stock - Ships Today

Price:

$22.89

Ice dispenser door chute (ice chute door)

*Please note, this door chute is no longer being manufactured with a heater.

Easy Part #:

EAP11739035

Availability:

In Stock - Ships Today

Price:

$11.90

Filter inlet water tube (water tube kit, filter inlet)

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".

Easy Part #:

EAP886401

Availability:

In Stock - Ships Today

Price:

$34.32

Easy Part #:

EAP12712096

Availability:

In Stock - Ships Today

Price:

$24.76

Complete dairy compartment door - clear (door, compartment)

This is a replacement dairy compartment door for your refrigerator. The dairy compartment door opens and closes to allow access to the dairy items stored in the refrigerator door. Because it is made of clear plastic, the door can occasionally become cracked and broken. When the door is cracked, it will need to be replaced. The door measures approximately 15 inches in length and 6 inches in width. To replace the door, carefully remove the old door and insert the new door, lipped edge down. This product is sold individually and is OEM part from the manufacturer.

Easy Part #:

EAP11739923

Availability:

In Stock - Ships Today

Price:

$41.61

Water tube kit (1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:

EAP11730901

Availability:

In Stock - Ships Today

Price:

$19.63

Ice auger kit (ice dispensing auger kit)

This kit includes the metal auger, auger coupling and washer.

Easy Part #:

EAP3500972

Availability:

In Stock - Ships Today

Price:

$61.61

Fresh food door gasket (refrigerator door gasket, white. If this gasket is worn out, cold air will leak out of the refrigerator. As a result, the fridge may run longer in an)

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Easy Part #:

EAP323900

Availability:

In Stock - Ships Today

Price:

$109.76

Floating baffle (baffle)

This ice auger support, also known as a baffle, is a manufacturer-approved replacement part for your refrigerator ice maker. This part can become cracked or damaged, preventing your ice auger from doing its job. This repair requires extensive disassembly; take photos as you go to make reassembly easier. To replace this part, life the ice door out of the way and life the ice arm into the off position. Pull out the ice bucket and use a 1/4 inch nut driver to remove the screws holding the ice container and connecting rod in place. Pry the e-clip and washer off the bottom of the auger assembly. Use a 9/16ths wrench to remove the nut at the bottom of the auger. Pull off the auger teeth assembly and replace the auger support with your new part. Now you can begin reassembling.

Easy Part #:

EAP11731223

Availability:

In Stock - Ships Today

Price:

$18.86

Screw (self-tapping screw.)

This screw is sold individually.

Easy Part #:

EAP11742755

Availability:

In Stock - Ships Today

Price:

$6.42

Spray paint - 12 oz. - white (spray paint, white, 12 ounces)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.

Easy Part #:

EAP347819

Availability:

In Stock - Ships Today

Price:

$11.99

Screw

Sold individually.

Easy Part #:

EAP11742754

Availability:

In Stock - Ships Today

Price:

$4.36

Cycling thermostat (thermostat for modular icemaker, with new clips)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:

EAP11743313

Availability:

In Stock - Ships Today

Price:

$30.45