10659512290 Kenmore Refrigerator Parts List

Ice mold (modular ice maker replacement ice cube mold and heater assembly, flake resistant surface)

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Screw (screw with plastic washer 8-18 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Ice dispenser door chute (ice chute door)

*Please note, this door chute is no longer being manufactured with a heater.

Evaporator fan blade (fan blade kit for evaporator fan motor)

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Refrigerator water filter (everydrop ice & water refrigerator filter 8, single port filter. Reduces 4 contaminants, including waterborne parasites such as cysts and heavy metals)

This Every Drop 8 water filter works in conjunction with the refrigerator to help reduce contaminants from the water supply, such as pesticides, cysts, industrial chemicals, and metal. It measures 4 inches high, 7.5 inches wide, 3.4 inches long, and weighs 1 lb. The filter compartment is in the top right corner of a side-by-side refrigerator and in the middle of the top-freezer refrigerator. If you notice the flow of water has decreased, it may be due to the filter needing to be changed. It should be replaced at least every six months.

Water tube kit (1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Arm-shut (icemaker shut-off arm assembly)

Screw (self-tapping screw.)

This screw is sold individually.

Cycling thermostat (thermostat for modular icemaker, with new clips)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Door light switch (door switch)

The white door light switch is in the control panel section of your refrigerator. The light will turn on when you open the door. If the light doesn?t turn on when the door is open the contacts in the switch could be burnt out and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting your repair.

Fresh food door gasket (refrigerator door gasket, white. If this gasket is worn out, cold air will leak out of the refrigerator. As a result, the fridge may run longer in an)

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

Screw

Sold individually.

Levers retainer/clip (retainer, lever)

This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer holds in the pivot points of the ice and water arms. If it breaks, the arms will be loose and can shake around. The top half springs the ice and water arms back into the original position, and if the retainer is broken, they will not be able to do this. The dispenser lever retainer is found behind the dispenser trim and can be removed with a ¼ inch nut driver. This part is sold individually and is an OEM part.

Thimble top (refrigerator door thimble)

For white, biscuit, black and stainless models.

Light socket kit

The bulb is sold separately.