Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

1069718280 Kenmore Refrigerator Parts List

1-15 of 261

Replacement ice maker (refrigerator icemaker. This item does not include a new shut off arm.)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:

EAP358591

Availability:

In Stock - Ships Today

Price:

$100.55

Defrost timer (refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advan)

This 120 volt, 60Hz defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. If the refrigerator is too warm, freezer section too warm or freezer not defrosting you might need to replace the defrost timer. This is a genuine OEM part. Disconnect the power to the refrigerator before starting the repair.

Easy Part #:

EAP11723171

Availability:

In Stock - Ships Today

Price:

$33.98

Icemaker control assembly (refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inle)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:

EAP2341896

Availability:

On Order

Price:

$85.77

Capacitor (compressor run capacitor)

The run capacitor is attached to the compressor. This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:

EAP11757023

Availability:

In Stock - Ships Today

Price:

$56.39

Door shelf end cap set (refrigerator or freezer shelf retainer bracket kit, pk of 2 right or left hand brackets with adhesive strips)

This door shelf end cap set contains two white end caps. Each end cap can be used as either the right or the left side. These end caps also come with adhesive strips and an instructions sheet.

Easy Part #:

EAP370794

Availability:

In Stock - Ships Today

Price:

$11.15

Easy Part #:

EAP16730711

Availability:

In Stock - Ships Today

Price:

$28.42

Ice maker water fill tube kit (icemaker water fill tube with compression nut.)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:

EAP11739222

Availability:

In Stock - Ships Today

Price:

$5.92

Door shelf end cap set (refrigerator door shelf retainer bracket, package of 2)

This door shelf end cap set contains two white end caps and adhesive tape.

Easy Part #:

EAP358766

Availability:

In Stock - Ships Today

Price:

$16.13

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:

EAP385132

Availability:

In Stock - Ships Today

Price:

$6.96

Bimetal defrost thermostat (refrigerator defrost thermostat, clip-on. This defrost heater monitors the temperature of the evaporator coils and sends power to the defrost heater d)

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:

EAP11742474

Availability:

In Stock - Ships Today

Price:

$28.34

Evaporator fan motor kit (refrigerator evaporator fan motor kit (with fan blade).)

The evaporator fan motor is in the back of the freezer section and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. It is suggested to replace the thermistor when replacing the evaporator fan. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:

EAP376645

Availability:

In Stock - Ships Today

Price:

$69.91

Single outlet water valve kit (refrigerator water inlet valve kit. The new part may appear different from the original. It features a new quick connect tube fitting.)

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making/dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair. The manufacturer has redesigned the valve; it may appear different than the original. The updated valve has a new quick connection. To install the updated valve, cut the retaining nut off the existing water line and gently push into the new valve. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:

EAP358631

Availability:

In Stock - Ships Today

Price:

$36.42

Easy Part #:

EAP11742744

Availability:

In Stock - Ships Today

Price:

$7.85

Water fill cup and bearing (bearing and cup assembly for icemaker)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:

EAP11743318

Availability:

In Stock - Ships Today

Price:

$33.67

Ice mold (modular ice maker replacement ice cube mold and heater assembly, flake resistant surface)

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:

EAP11749915

Availability:

On Order

Price:

$121.36

1-15 of 261