10644032600 Parts List

Seal

This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ice bucket. If the seal is broken, water and condensation can get in, causing the ice maker to fail. To replace the seal, first remove the ice bucket from your freezer. Then remove the two screws on the drive shaft holder, and use a pair of pliers to remove the drive shaft. At this point you can remove the seal from the drive shaft. Be sure to clean the area that the seal sits in before you reinstall the drive shaft. This part is white in color and is about an inch in diameter. The seal is sold individually.

Easy Part #:

EAP11739241

Availability:

In Stock

Price:

$7.64

Cantilever shelf with glass (cantilever shelf)

This part includes the frame and glass. This shelf can be moved according to the space you need. These shelves are supported at the back of the refrigerator. Note: As per the manufacturer this shelf no longer has graphics.

Easy Part #:

EAP2352439

Availability:

In Stock

Price:

$99.82

Stripper arm kit (strips arm)

This kit includes the stripper arm and fill cup.

Easy Part #:

EAP2378115

Availability:

In Stock

Price:

$29.96

Flipper

This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and houses the flipper cover for the emitter board. If your flipper is broken or missing, your ice maker may not make or dispense ice, and will need to be replaced. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Easy Part #:

EAP11739242

Availability:

In Stock

Price:

$27.36

Screw

This screw is sold individually.

Easy Part #:

EAP11742755

Availability:

In Stock

Price:

$6.05

Cycling thermostat (thermostat)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:

EAP11743313

Availability:

In Stock

Price:

$33.77

Spray paint - 12 oz. - white (spray)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.

Easy Part #:

EAP347819

Availability:

In Stock

Price:

$10.95

Screw

Sold individually.

Easy Part #:

EAP11742754

Availability:

In Stock

Price:

$3.36

Single shelf stud (shelf stud)

This part screws into the side of the wall in your fresh food compartment and supports a shelf.

Easy Part #:

EAP11739228

Availability:

In Stock

Price:

$5.76

Screw

Sold individually.

Easy Part #:

EAP11745619

Availability:

In Stock

Price:

$6.04

Shelf support (stud assembly)

Sold individually.

Easy Part #:

EAP12578346

Availability:

In Stock

Price:

$20.30

Levers retainer/clip (clip)

This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer holds in the pivot points of the ice and water arms. If it breaks, the arms will be loose and can shake around. The top half springs the ice and water arms back into the original position, and if the retainer is broken, they will not be able to do this. The dispenser lever retainer is found behind the dispenser trim and can be removed with a ¼ inch nut driver. This part is sold individually and is an OEM part.

Easy Part #:

EAP11739183

Availability:

In Stock

Price:

$7.97

Light socket kit (light socket)

The bulb is sold separately.

Easy Part #:

EAP371236

Availability:

In Stock

Price:

$38.00

Screw

Sold individually.

Easy Part #:

EAP11751591

Availability:

In Stock

Price:

$5.36

Washer, coupling (washer)

This washer is sold individually.

Easy Part #:

EAP11739247

Availability:

In Stock

Price:

$5.43