Parts for Kenmore Models 1066748641

Replacement ice maker (ice maker assembly)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:: EAP358591

Availability:: In Stock

Price:: $111.50

Condenser fan motor kit (motor)

This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This part also helps to evaporate excess water in the drain pan. If your refrigerator/freezer section is too warm you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting the repair.

Easy Part #:: EAP395284

Availability:: In Stock

Price:: $58.77

Ice maker water fill tube kit (fitting, water tube)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:: EAP11739222

Availability:: In Stock

Price:: $9.44

Refrigerator door switch (switch, rocker arm)

Door switch turns the light off when you close the door.

Easy Part #:: EAP12728638

Availability:: In Stock

Price:: $32.07

Single outlet water valve kit (valve, solenoid)

When energized, the water inlet valve will release water from the supply line into the ice mold and the water dispenser in the refrigerator. If the ice maker is not making/dispensing ice, not dispensing water, or leaking, you may need to replace the water inlet valve. The water inlet valve is in the back section of your refrigerator and will need to be pulled out from the wall. Make sure to disconnect both the water and power supply before starting your repair. The manufacturer has redesigned the valve; it may appear different than the original. The updated valve has a new quick connection. To install the updated valve, cut the retaining nut off the existing water line and gently push into the new valve. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:: EAP358631

Availability:: In Stock

Price:: $30.16

Screw (screw, 8 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $7.37

Water tube kit (tube, water)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11730901

Availability:: In Stock

Price:: $30.10

Evaporator fan motor kit (motor, fan)

This refrigerator evaporator fan motor kit comes with a wiring harness and a four-inch push on fan blade.

Easy Part #:: EAP376600

Availability:: In Stock

Price:: $68.49

Light socket kit (socket)

The bulb is sold separately.

Easy Part #:: EAP371236

Availability:: In Stock

Price:: $64.67

Compression nut (nut, compression (1/4" diameter))

This single 1/4-inch compression nut is used to connect the lines that supply water to the correct components, the water dispenser and the ice maker, with the plastic water line of the icemaker assembly. This is a genuine OEM part. Please remember to disconnect the power and water supply to the refrigerator before starting your repair.

Easy Part #:: EAP11743305

Availability:: In Stock

Price:: $12.22

Hinge bracket (bracket, door stop)

This part is used to support the hinge.

Easy Part #:: EAP11739061

Availability:: In Stock

Price:: $11.98

Refrigerator front roller kit (roller, front (2))

Support wheel assembly with bracket. Kit of 2.

Easy Part #:: EAP370711

Availability:: In Stock

Price:: $76.11

Screw (screw, 10-32 x 23/32)

Sold individually.

Easy Part #:: EAP11747799

Availability:: In Stock

Price:: $8.52

Hinge washer (washer)

The hinge washer works in conjunction with the door hinge on the refrigerator door. This part is white in color and measures approximately 0.75” in diameter. If the refrigerator door is making noise opening and closing, you may need to replace this part. This is a genuine OEM part and is sold individually.