1067690660 Kenmore Refrigerator Parts List

Light bulb - 40w (bulb, light)

This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Condenser fan motor kit (motor)

This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This part also helps to evaporate excess water in the drain pan. If your refrigerator/freezer section is too warm you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting the repair.

Ice maker water fill tube kit (fitting, tube)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Refrigerator door switch (switch, light)

Door switch turns the light off when you close the door.

Dual outlet valve kit (valve, solenoid)

This part comes with several mounting brackets and plastic unions.

Screw (screw, 8 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Water tube kit (tube, water)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Evaporator fan motor kit (motor, fan)

This refrigerator evaporator fan motor kit comes with a wiring harness and a four-inch push on fan blade.

Light socket kit (socket)

The bulb is sold separately.

Compression nut (nut)

This single 1/4-inch compression nut is used to connect the lines that supply water to the correct components, the water dispenser and the ice maker, with the plastic water line of the icemaker assembly. This is a genuine OEM part. Please remember to disconnect the power and water supply to the refrigerator before starting your repair.

Refrigerator front roller kit (roller, front)

Support wheel assembly with bracket. Kit of 2.

Door hinge nylon washer (washer, 1/16)

Water dispenser reservoir tubing (reservoir, water)

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

Screw (screw, 10-32 x 3/4)

Sold individually.

Fresh food door gasket (gasket, door)

This white door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.