Parts for Kenmore Models 1069500520

Door cam - black (door closer, lower cam)

The refrigerator uses a set of cams to help with the closing of the doors and help to keep them in position. These cams are mounted around the door pivot point and are made up of a series of ridges and valleys to help keep the door in position. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color, made of plastic, and is sold individually. This is a genuine OEM part. Note: As per the manufacturer a new screw is needed to mount the door cam. This door cam is sold individually.

Easy Part #:: EAP11752991

Availability:: In Stock - Ships Today

Price:: $9.83

Ice bin auger drum (drive bar)

This white ice bin auger drum comes with a washer.

Easy Part #:: EAP372186

Availability:: In Stock - Ships Today

Price:: $48.76

Door closing cam kit (door closer, upper cam)

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.

Easy Part #:: EAP358690

Availability:: In Stock - Ships Today

Price:: $11.10

Shelf support stud - white (stud, rear)

This kit contains two options - One that is a push and turn and the other that is a screw in.

Easy Part #:: EAP372050

Availability:: In Stock - Ships Today

Price:: $21.43

Crisper cover with glass (cover, crisper)

This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails. Follow the instructions in the owner's manual or installation guide when installing this part. This comes with glass.

Easy Part #:: EAP4082908

Availability:: In Stock - Ships Today

Price:: $112.00

Refrigerator shelf glass (glass, crisper cover)

This is the glass panel only. The frame is sold separately.

Easy Part #:: EAP11731733

Availability:: In Stock - Ships Today

Price:: $98.61

Stud-shelf (stud)

This is a 12 piece kit.

Easy Part #:: EAP16730711

Availability:: In Stock - Ships Today

Price:: $25.34

Ice maker water fill tube kit (fitting, water tube)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10-inches long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:: EAP11739222

Availability:: In Stock - Ships Today

Price:: $9.44

Bi-metal defrost thermostat (bi-metal, defrost)

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

Easy Part #:: EAP11750673

Availability:: In Stock - Ships Today

Price:: $37.85

Screw

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Easy Part #:: EAP12349731

Availability:: In Stock - Ships Today

Price:: $19.34

Nozzle and tube kit (water fitting assembly)

This kit is intended for use with refrigerators that have a water dispenser in the door.

Easy Part #:: EAP11742481

Availability:: In Stock - Ships Today

Price:: $85.75

Micro switch (switch)

This switch is located inside the dispenser.

Easy Part #:: EAP11738948

Availability:: In Stock - Ships Today

Price:: $19.47

Screw

Sold individually.

Easy Part #:: EAP11742744

Availability:: In Stock - Ships Today

Price:: $7.40

Door shelf trim (trim, door shelf)

Also known as door retainer bar. End caps are not included. White in color. Part needs to be cut to proper length.

Easy Part #:: EAP11739547

Availability:: In Stock - Ships Today

Price:: $52.01

Water fill cup and bearing (cup-water fill)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker is not making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.