110.9281100 Parts List

1-15 of 142

Agitator directional cogs (washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package.)

These agitator directional cogs are commonly referred to as dog ears. They come four in a package and are usually used with direct drive washing machines. When the teeth on the outer edge are worn down the cogs will not engage with the upper agitator, causing it not to agitate properly. It is recommended to replace all four at the same time. These agitator directional cogs are ?-inch high and 1-inchlong and they are a genuine OEM part.

Easy Part #:

EAP388034

Availability:

In Stock - Ships Today

Price:

$2.50

Direct drive motor coupling (washer drive motor coupler. New style with metal sleeves for added strength. This version replaces all previous motor coupler styles and versions. For)

The newer version of the coupler kit is made with new metal sleeves for added strength. This part is located between the motor and transmission on the direct drive washer that does not have a belt. The coupler will break to protect the motor from damage if the drive motor system seizes up. If your washer will not fill, will not agitate or spin, but it will drain the water from the tub, you may need to replace this part because it has failed. This is a genuine OEM part. Disconnect the power to your washer before starting the repair.

Easy Part #:

EAP1485646

Availability:

In Stock - Ships Today

Price:

$12.65

Direct drive water pump (washing machine drain pump. The pump mounts directly to the motor with two clips. If the washer does not drain then the pump could be locked up or a s)

This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one. This part is used to remove water from the tub during the drain cycle. If your washer is leaking, not draining, pumps but will not spin or fills and drains at the same time you may need to replace the pump. The pump is located on the motor and is attached by two clips. This part is white in color, made from plastic and is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:

EAP11741239

Availability:

In Stock - Ships Today

Price:

$26.55

Clutch assembly (washing machine clutch assembly with hardware. *blue spring for large capacity washers, black for compacts.)

The clutch assembly is used on direct drive washing machines and helps spin the basket during the spin cycle to remove water from the tub. If your clutch is worn out it can cause the washer to be noisy or leave water in the tub because it won’t drain properly, which will leave your clothes soaked. The clutch assembly includes a brake cam driver, retaining ring, bearing, and a spring, depending on your model number. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the washer before starting your repair.

Easy Part #:

EAP334641

Availability:

In Stock - Ships Today

Price:

$26.29

Water inlet valve with mounting bracket (washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disa)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:

EAP334646

Availability:

In Stock - Ships Today

Price:

$21.44

Suspension spring (washing machine suspension spring. If the suspension spring is broken, the washer will be off balance.)

This suspension spring is used to support and balance the outer tub of your washer. If the spring is broken it will cause the washer to be off balance and noisy. Check your model to see how many springs are required for your model. The spring is sold individually.

Easy Part #:

EAP11743345

Availability:

In Stock - Ships Today

Price:

$3.58

Timer knob (improved washer timer knob with metal threads and chrome center.)

This replacement timer knob is black with a chrome center. Use this improved timer knob with its metal threads for your clothes washer. Colors Almond, Toast and Platinum are discontinued.

Easy Part #:

EAP11741232

Availability:

In Stock - Ships Today

Price:

$21.70

Agitator bolt (washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

Easy Part #:

EAP11741866

Availability:

In Stock - Ships Today

Price:

$4.57

Agitator repair kit (washing machine agitator repair kit with reversing dog ears and, long cam, and retainer.)

This six piece agitator repair kit comes with a four inch cam, a thrust spacer, and four dogs ears (agitator cogs). This kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover).

Easy Part #:

EAP334622

Availability:

In Stock - Ships Today

Price:

$20.16

Lid switch assembly (washing machine lid switch assembly. If the washer does not spin the lid switch may be defective.)

This part makes sure that the lid is shut before allowing the machine to start or agitate.

Easy Part #:

EAP334600

Availability:

In Stock - Ships Today

Price:

$28.59

Tub spring (washing machine tub counterbalance spring. This spring offsets the weight of the motor on the front of the washer.)

This suspension spring is used to support and balance the outer tub of your washer. If the spring is broken it will cause the washer to be noisy and off balance during the spin cycle. Please check your model to see how many springs are required for your model. The spring is sold individually. This is a genuine OEM part. Please make sure you disconnect the power to the washer before starting your repair.

Easy Part #:

EAP11751118

Availability:

In Stock - Ships Today

Price:

$4.57

Thrust spacer (thrust washer for washing machine agitator. This thrust washer is found between the upper and lower sections of the agitator.)

This white thrust spacer is made of plastic and is also commonly referred to as a retainer ring. It is approximately 2 1/2-inch in diameter. The thrust spacer is used in the agitator assembly between the agitator and the auger. The thrust spacer supports the agitator auger as it moves. It is used in many direct drive washer machine models. If your washer will not agitate or is noisy, you may need to replace the thrust spacer. Please be sure to disconnect the power to your washer before starting your repair. You may need agitator grease for the repair. This is a genuine OEM part.

Easy Part #:

EAP334562

Availability:

In Stock - Ships Today

Price:

$3.27

Centerpost gasket (washing machine main tub seal)

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Easy Part #:

EAP11723081

Availability:

In Stock - Ships Today

Price:

$3.77

Lid bumper (bumper for lid)

This single gray and white washer lid bumper contains a rubber bottom to help cushion the lid as it closes against the cabinet lid. If your bumper is missing you should replace the part to avoid metal on metal causing damage to the top of the washer. This is a genuine OEM part and is sold individually.

Easy Part #:

EAP11747040

Availability:

In Stock - Ships Today

Price:

$4.49

1-15 of 142