1106007301 Kenmore Dryer Parts List

Light bulb - 40w (light bulb)

This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Light bulb - 10w (light bulb)

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Lid switch (service door switch (production switches 233480 or 235462))

The door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open. The dryer cannot operate until the door switch signals that the door is closed. If your dryer will not start or the switch shorted out, your washer will not operate and the switch will need to be replaced. This switch is a genuine OEM part. Please remember to disconnect power to the dryer before starting the repair.

Screw, 8/18 x 3/8 (no. 8 x 3/8 screw (standard hardware item-may be purchased locally))

This screw is sold individually.

Cycling thermostat - limit 135/155 (fixed thermostat-135 deg.)

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.

Door cable

This dryer door cable is intended for use with spring part number PS343422. This cable is compatible with many of Whirlpool/Kenmore's brands of gas and electric clothes dryers.

Front top lock (top lock)

This part is used to secure the top panel to the cabinet. Sold individually.

Screw (no. 10 x 1/2 screw (standard hardware item-may be purchased locally))

This screw is sold individually.

Clamp-motor (motor mounting clip)

This clamp is used to secure the drive motor.

Hex nut (no. 8-32 nut (standard hardware item-may be purchased locally))

This hex nut will work with a variety of appliances. This part is made of metal and measures 8-32 x .124. Over time the hex nut will wear out and will need to be replaced and is recommended to order a spare. This is a genuine OEM part and sold individually.

Seal-door (door seal)

Adhesive sold separately.

Door hinge - left side (door hinge-lh)

Screw (no. 8 x 5/16 screw (standard hardware item-may be purchased locally))

This screw is sold individually.

Screw (no. 8 x 1/2 screw (standard hardware item-may be purchased locally))

Sold individually.

Hinge (door hinge-rh)