11086402100 Kenmore Dryer Parts List

Search the entire 11086402100 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 10
1-15 of 145

Door catch kit (strike, door)

This door catch kit contains two door strikes and three door catches to service dryer doors that have one or two catches. Make sure to read the instructions to determine which one to use for your model. These parts keep the dryer door closed to allow the dryer to operate. If your door won't stay closed or will not start you may need to replace this part. This is a genuine OEM part.

Easy Part #:
EAP334230
Availability:
In Stock - Ships Today
Price:
$4.02

Dryer drum support roller (roller, support)

The drum support roller has a metallic bearing in its center. This part is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, will not tumble or takes too long to dry, you might need to replace the roller. It is recommended that you replace both rollers at once. This is a genuine OEM part and is sold individually. Please remember to shut off the power to the dryer before starting the repair.

Easy Part #:
EAP11752609
Availability:
In Stock - Ships Today
Price:
$19.40

Idler pulley (pulley assembly)

A dryer's idler pulley helps the belt to rotate the drum. It is also known as dryer belt tension pulley wheel.

Easy Part #:
EAP334244
Availability:
In Stock - Ships Today
Price:
$23.43

Drive motor with pulley (switch, motor)

This drive motor operates the dryer by turning the drive belt which spins the drum and will fit most Whirlpool incorporated dryer brands before 1996. If the motor has shorted out, it will no longer turn the drum and will need to be replaced. The drive motor includes the pulley that is not available separately. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP334304
Availability:
In Stock - Ships Today
Price:
$94.73

Leveling foot (foot, dryer (plastic) (4))

The adjustable leveling leg is used to support and keep your dryer level. It also allows you to adjust the height of your dryer. You may need to replace the leveling leg if one becomes lost, the thread is stripped off, or it is noisy during operation. The leveling leg is almost 2” long, white in color, and made of plastic. There are four leveling legs used on the dryer, please order quantity needed as they are sold individually. This is a genuine OEM part.

Easy Part #:
EAP1609293
Availability:
In Stock - Ships Today
Price:
$7.60

Roller support tri-ring (tri-ring)

The tri ring is used to hold the drum support rollers or the idler pulley onto the shaft. If your dryer will not tumble or is noisy, you may need to replace the tri ring. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11755850
Availability:
In Stock - Ships Today
Price:
$10.54

Thrust washer (washer, thurst)

This part is located between the drum support rollers and idler pulley in your dryer to help prevent the parts from bumping up against the brackets they are attached to. If your dryer has a burning smell, is noisy, or will not tumble, you may need to replace the thrust washer. The washer is 3/4 inches in diameter and a is genuine OEM part. It is recommended to disconnect the power to your dryer before you start your repair.

Easy Part #:
EAP11740482
Availability:
In Stock - Ships Today
Price:
$7.40

High limit thermostat and thermal cut-off kit (thermal cut-off)

Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than the thermostat. Once it trips, it has to be replaced.

Easy Part #:
EAP334387
Availability:
In Stock - Ships Today
Price:
$44.60

Disposable thermal fuse - two terminal (thermal fuse)

This part attaches to the exhaust duct of your clothes dryer.

Easy Part #:
EAP11741444
Availability:
In Stock - Ships Today
Price:
$16.72

Heating element connection wire kit (terminal wire kit (for heater element wiring harness repair))

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

Easy Part #:
EAP334206
Availability:
In Stock - Ships Today
Price:
$10.30

Idler pulley with bracket (bracket, idler)

The idler pulley wheel is now sold with this arm. This idler pulley is for dryers. Idler pulley maintains correct tension on the drive belt to spin the drum.

Easy Part #:
EAP11726337
Availability:
In Stock - Ships Today
Price:
$22.26

Dryer drum seal with adhesive (seal, drum)

This part seals the drum to prevents air from escaping. This includes silicone rubber adhesive.

Easy Part #:
EAP970088
Availability:
In Stock - Ships Today
Price:
$42.24

Screw - 10-16 x 1 (screw, 10-16 x 3/4)

This screw is sold individually.

Easy Part #:
EAP11741409
Availability:
In Stock - Ships Today
Price:
$7.40

Cycling thermostat - limit 135/155 (thermostat 150 deg f (65.6 deg) 341146 (alt.))

Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted between 135 and 155 degrees Fahrenheit. The differential of this thermostat is 20 degrees, meaning that with this thermostat, the heating element will cycle back on once the internal temperature drops by 20 degrees.

Easy Part #:
EAP11743793
Availability:
In Stock - Ships Today
Price:
$49.43

Screw

Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.

Easy Part #:
EAP11738704
Availability:
Special Order
Price:
$7.40
< PREV 1 2 3 4 5 6 ... 10
1-15 of 145