1197498890 Kenmore Range Parts List

Flat style oven igniter (bake ignitor)

The flat-style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter, be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3.72-inch in length and the amperage range is 3.2 to 3.6. This is a genuine OEM part.

Oven light socket (oven light receptacle)

The light socket is located inside the oven cavity to provide power to the light while holding the light bulb in place. If the light bulb is not working, the switch might have failed and will need to be replaced. This is a genuine OEM part. Please remember to disconnect power to the oven before starting your repair.

Hinge - right side (right)

Door hinge - left side (left)

This hinge is located on left side of the oven door.

Screw - flat head (screw)

Sold individually.

Screw

Sold individually.

Flat style oven igniter (broil ignitor)

This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.

Spring (oven door spring)

Griddle

Gas pressure regulator (pressure regulator)

***No Conversion Kit Required - Adjust On Appliance*** This valve automatically cuts off the flow of a liquid or gas when it reaches a certain pressure.

Broiler pan & inser (broiler pan grid)

Burner grate - black (top grate)

Sold individually.

Panel (oven bottom plate)

Switch (light switch)

Screw (bolt)