Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

36314391993 Kenmore Dishwasher Parts List

1-15 of 110

Lower rack wheel kit - 8 pack (roller asm lwr rack rear)

The lower rack wheel kit includes 8 wheels and 8 axels for your rack. If your dishrack is not moving in and out of the dishwasher properly you may have a broken or missing wheel and it will need to be replaced. The wheel and axle are white in color and made of plastic. This is a genuine OEM part kit.

Easy Part #:

EAP11726733

Availability:

In Stock - Ships Today

Price:

$27.31

Rack slide end cap

This white rack track stop is used for your upper dishrack track to prevent the rack from sliding off the slide rail. If your rack is falling off the track, you may need to replace the track stop. This is a genuine OEM part and is sold individually.

Easy Part #:

EAP2370502

Availability:

In Stock - Ships Today

Price:

$12.59

Upper roller and axle - kit of 4 (4-rlr std asm,upr rack)

The upper roller and axle attach to the upper rack to allow the dishrack to move in and out along the track of the dishwasher. This is a kit includes 4 rollers and 4 axles for your upper rack. If your dish rack is not moving in and out of the dishwasher properly you may have a broken or missing wheel and it will need to be replaced. The rollers and axles are made out of plastic and are white in color. This is a genuine OEM kit.

Easy Part #:

EAP3486910

Availability:

In Stock - Ships Today

Price:

$17.55

Lower front dishrack wheel (roller asm lwr rack frnt)

This wheel is located on the front lower rack. It includes the axle. Sold individually.

Easy Part #:

EAP259136

Availability:

In Stock - Ships Today

Price:

$13.93

Lower rack (rack lower roller asm)

The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.48 X 21.99 and the wheels are included with the rack. This is a genuine OEM part and is white in color.

Easy Part #:

EAP17137102

Availability:

In Stock - Ships Today

Price:

$191.65

Silverware basket (grey) (basket silverware tm)

This is a basket for washing flatware or silverware in your dishwasher. It is located on the lower rack. If your silverware basket is damaged or worn out, you should replace it. No tools are required for this repair. This basket is a genuine OEM part.

Easy Part #:

EAP261346

Availability:

In Stock - Ships Today

Price:

$65.45

Corner tub baffle - lower right (baffle tub corner rh)

This baffle fits the lower right-hand corner of the dishwasher, is black in color, made of plastic, and has a matching left-hand lower corner baffle that is sold separately. The baffle is used to prevent water from leaking from the tub through the door. If your baffle is damaged, worn, or missing, it will cause the dishwasher to leak and the baffles will need to be replaced. It is recommended that you replace both left and right baffles at the same time. This is a genuine OEM part.

Easy Part #:

EAP263963

Availability:

In Stock - Ships Today

Price:

$19.38

Corner tub baffle - lower left (baffle tub corner lh)

This baffle fits the lower left-hand corner of the dishwasher, is black in color, made of plastic and has a matching right-hand lower corner baffle that is sold separately. The baffle is used to prevent water from leaking from the tub through the door. If your baffle is damaged, worn, or missing, it will cause the dishwasher to leak and the baffles will need to be replaced. It is recommended that you replace and install both the left and right baffle at the same time. This is a genuine OEM part.

Easy Part #:

EAP263964

Availability:

In Stock - Ships Today

Price:

$18.37

Upper dishrack (rack upper roller tm)

This dish rack includes the wheels. This dishrack is for dishwashers. Dishrack holds the dishes in place during the dishwashing cycle

Easy Part #:

EAP17137101

Availability:

In Stock - Ships Today

Price:

$191.64

Water inlet valve (water valve inlet)

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. This valve has a 3/8" inlet and comes with the mounting bracket.

Easy Part #:

EAP259368

Availability:

In Stock - Ships Today

Price:

$64.35

Upper track roller kit (roller stud asm)

This upper track roller kit comes with a screw for easy assembly.

Easy Part #:

EAP259157

Availability:

In Stock - Ships Today

Price:

$8.66

Drain valve shaft seal (gate shaft seal)

The grate shaft seal, also known as drain valve shaft seal, is a seal for your dishwasher drain pump valve. The seal forms a watertight seal around the flapper valve shaft to avoid water from leaking on to the floor. The seal is black in color and measures .25” in diameter. When doing the repair, you may need to cut off the push-on nut, if so a new one will need to be ordered. Please remember to shut off the water supply and disconnect the power to the dishwasher before starting the repair. This is a genuine OEM part.

Easy Part #:

EAP263930

Availability:

In Stock - Ships Today

Price:

$23.74

Motor and pump kit (mechanism asm)

This pump and motor kit replaces many old style pump and motor kits that were manufactured since 1970. The instructions are included with this kit to help you to make it adaptable to your dishwasher. NOTE: This is a completely redesigned kit by the manufacturer and now includes the drain solenoid.

Easy Part #:

EAP260801

Availability:

In Stock - Ships Today

Price:

$227.97

Push on nut (nut push on)

This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.

Easy Part #:

EAP298353

Availability:

In Stock - Ships Today

Price:

$7.07

Hinge arm link (link hinge arm)

The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.

Easy Part #:

EAP259336

Availability:

In Stock - Ships Today

Price:

$7.43

1-15 of 110