Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

3639557722 Kenmore Refrigerator Parts List

1-15 of 339

Drawer slide rail - right side (slide assembly rh)

This replacement drawer slide rail is for the right-hand side of your refrigerator. This part attaches to the inside wall of your refrigerator to support the sliding crisper drawer. If the rail is broken or the drawer is not sliding properly, you will need to replace the slide rail. You will need a Phillips screwdriver to complete this repair.

Easy Part #:

EAP306944

Availability:

In Stock

Price:

$36.49

Ice maker (icemaker assembly)

This ice maker assembly is used to make ice in your refrigerator. The ice maker receives water from the water inlet valve and will freeze until ice cubes are formed. Once the water has been frozen the cubes will be ejected from the mold into the ice bucket. The ice maker will continue the process until the ice bucket has reached the limit. If your ice maker is not making ice you may need to replace this part. This kit includes the fill cup, 4-pin wire harness adapter, and a tube. Disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:

EAP1993870

Availability:

In Stock

Price:

$175.74

Drawer slide rail - left side (slide assembly lh)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Easy Part #:

EAP306943

Availability:

In Stock

Price:

$23.70

Dual inlet water valve (water valve assembly)

This valve comes with 1/4" compression inlet. NOTE: This part comes with new quick connections. To install - cut retaining nuts off of existing plastic water lines and gently push them into new valve. To remove - depress ring that the tube slides into.

Easy Part #:

EAP901314

Availability:

In Stock

Price:

$51.27

Dispenser door assembly or flapper (door recess assembly)

The ice chute door opens to dispense ice once activated. This part mounts in the ice dispenser. If it is too warm inside your refrigerator, there is frost build up, or your icemaker will not make or dispense ice, you may need to replace the ice chute door. The crank no longer comes with this part, but you can use the original crank. The crank is sold separately depending on the model number of your appliance. The ice chute door is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:

EAP964304

Availability:

In Stock

Price:

$12.72

Light switch (switch light wh)

The refrigerator light switch turns the interior light off and on when you open or close the refrigerator door. The light switch also prevents the front dispenser from working if the refrigerator door is opened. If the switch has shorted out or the light bulb is not turning on when the door is open, you may need to replace the switch. This switch is white in color and measures approximately 1 1/2” L x 1 1/4” W. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting the repair.

Easy Part #:

EAP8758429

Availability:

In Stock

Price:

$7.26

Defrost timer (control defrost)

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

Easy Part #:

EAP310858

Availability:

In Stock

Price:

$37.10

Union connector - 5/16 inch to 5/16 inch (nut and union assembly)

Quick connector for plastic water line - 5/16" to 5/16"

Easy Part #:

EAP758446

Availability:

In Stock

Price:

$8.18

Dispenser control board - 2 slide switches (module time delay)

It is used with those refrigerators that have an ice and water dispenser in the door.

Easy Part #:

EAP304236

Availability:

No Longer Available

Light bulb - 40w (lamp 40w)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Easy Part #:

EAP217532

Availability:

In Stock

Price:

$12.94

Package of 12 screws (scr 8-18 rndw 5/8ss)

This is a package of twelve Phillips-head screws. They can be used as replacement screws in refrigerators, ice makers, or freezers. Be sure to check that your appliance model is compatible with these screws. The screws are approximately ¾ of an inch in length.

Easy Part #:

EAP312573

Availability:

No Longer Available

Auger and ice bucket assembly (bucket and auger assembly disp)

This auger and bucket assembly is used on 25 cubic feet and 27 cubic feet side by side models.

Easy Part #:

EAP294039

Availability:

In Stock

Price:

$190.71

Actuator pad (pad actuator bk)

Note: This part is now ONLY available in black.

Easy Part #:

EAP299261

Availability:

No Longer Available

Ice dispensing drive cup (cup drive dispenser)

Found at the end of the auger in the ice container - replace when the icemaker doesn't dispense ice.

Easy Part #:

EAP297895

Availability:

In Stock

Price:

$21.86

Ice dispenser solenoid service kit (solenoid and arm assembly)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Easy Part #:

EAP11699580

Availability:

In Stock

Price:

$84.54

1-15 of 339