Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

41782042101 Kenmore Dryer Parts List

1-15 of 88

Rear drum bearing kit (bearing)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP459829

Availability:

In Stock - Ships Today

Price:

$52.07

Drum belt (belt)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP1148434

Availability:

In Stock - Ships Today

Price:

$14.30

Heating element assembly (heater assembly with housing)

This E-line assembly comes with a felt strip and insulators already attached. Heating elements are strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer. If your dryer has little or no heat you may need to replace the heating element. This is a genuine OEM part. Please remember to shut off the power to the dryer before starting the repair.

Easy Part #:

EAP418120

Availability:

In Stock - Ships Today

Price:

$117.10

Drum support bearing (bearing drum)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock - Ships Today

Price:

$5.21

Drum glide - white (glide drum)

The white drum glide supports the drum on the front side and helps rotate smoothly and quietly while operating. If your dryer won’t tumble or is noisy, the drum glide may be worn down causing a metal on metal noise. Your dryer requires two glides; it is recommended to replace both glides at the same time. The drum glide is a genuine OEM part and is sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP5574052

Availability:

In Stock - Ships Today

Price:

$27.92

Door catch

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP418433

Availability:

In Stock - Ships Today

Price:

$61.61

Front lower drum seal (lower felt seal)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:

EAP460194

Availability:

In Stock - Ships Today

Price:

$33.70

Turn - type start switch (switch)

This part is used to start the dryer once you have selected a setting on the timer.

Easy Part #:

EAP975832

Availability:

In Stock - Ships Today

Price:

$48.84

Thermal limiter - limit 220 (thermal light)

This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out. If your dryer overheats, will not start, takes too long to dry, or has no heat or not enough heat, you will need to replace the fuse because it cannot be reset. This is a genuine OEM part. It is recommended to disconnect the power to your dryer before starting your repair.

Easy Part #:

EAP419402

Availability:

In Stock - Ships Today

Price:

$17.04

Blower housing with blower wheel (asmy-blwr hs)

The blower wheel and housing assembly attaches to the drive motor shaft, blows the air through the drum and out through the exhaust. If the dryer is taking too long to dry, is noisy, or there is no air flow during operation, then the blower wheel could be damaged or broken and will need to be replaced. This part is white in color and made of plastic. This blower wheel and housing assembly will fit 471 series Kenmore eclectic or gas dryers. Will also fit some Frigidaire, Crosley, Gibson and White Westinghouse gas or electric dryers. Please check your model number. Please be sure to disconnect the power to your dryer before starting your repair. This is a genuine OEM part.

Easy Part #:

EAP418726

Availability:

In Stock - Ships Today

Price:

$92.89

High limit thermostat (high-limit thermostat)

The two-terminal high limit thermostat has a limit of 260 degrees Fahrenheit and acts as a safety mechanism that keeps the dryer from overheating. The thermostat will cut out when the internal dryer temperature reaches 260 and then cuts back in when the temperature drops by 70 degrees Fahrenheit. If your dryer is not heating, you may need to replace the thermostat. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP446428

Availability:

In Stock - Ships Today

Price:

$69.84

Dryer drum bearing bracket (bracket)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:

EAP12579101

Availability:

In Stock - Ships Today

Price:

$10.04

Lint filter (lint trap)

This white dryer lint filter screen collects lint as it passes through the dryer vent.

Easy Part #:

EAP417841

Availability:

In Stock - Ships Today

Price:

$22.24

Drive motor with pulley (motor)

This motor has a double shaft.

Easy Part #:

EAP418132

Availability:

In Stock - Ships Today

Price:

$156.96

Front upper felt seal with adhesive (upper felt seal)

The upper felt seal for your dryer is attached to the top edge of the drum support area, and is held there by a high temperature adhesive. It creates a seal where the dryer door opens and closes, so that heat remains in the dryer while it tumbles. If your old upper felt seal is coming apart, you notice that hot air is leaking out the dryer door, or your clothes are taking too long to dry, you may need to replace the seal. When you order this part, it comes with the upper felt seal, as well as the required high-temperature adhesive.

Easy Part #:

EAP832644

Availability:

In Stock - Ships Today

Price:

$19.31

1-15 of 88