41784072300 Parts List

1-15 of 85

Rear drum bearing kit (bearing)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP459829

Availability:

In Stock - Ships Today

Price:

$17.12

Heating element assembly (heater assembly with housing)

This E-line assembly comes with a felt strip and insulators already attached. Heating elements are strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer. If your dryer has little or no heat you may need to replace the heating element. This is a genuine OEM part. Please remember to shut off the power to the dryer before starting the repair.

Easy Part #:

EAP418120

Availability:

In Stock - Ships Today

Price:

$64.98

Drum support bearing (bearing drum)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock - Ships Today

Price:

$4.35

Drum glide - white (glide drum)

The white drum glide supports the drum on the front side and helps rotate smoothly and quietly while operating. If your dryer won’t tumble or is noisy, the drum glide may be worn down causing a metal on metal noise. Your dryer requires two glides; it is recommended to replace both glides at the same time. The drum glide is a genuine OEM part and is sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP5574052

Availability:

In Stock - Ships Today

Price:

$20.87

Door catch

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP418433

Availability:

In Stock - Ships Today

Price:

$36.47

Lower front felt seal with adhesive (felt)

The lower drum felt seal is used to help the drum glide smoothly on the front panel. If your dryer takes too long to dry or is noisy while the dryer drum is spinning, you may need to replace the seal. The seal measures approximately 47” L x 1” W and the adhesive is included. Please disconnect the power to the dryer before beginning the repair. This is a genuine OEM part.

Easy Part #:

EAP832645

Availability:

In Stock - Ships Today

Price:

$15.95

Thermal limiter - limit 220 (thermal light)

This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out. If your dryer overheats, will not start, takes too long to dry, or has no heat or not enough heat, you will need to replace the fuse because it cannot be reset. This is a genuine OEM part. It is recommended to disconnect the power to your dryer before starting your repair.

Easy Part #:

EAP419402

Availability:

In Stock - Ships Today

Price:

$10.34

Ball hitch (bearing)

If your dryer is noisy, not starting, or is not tumbling, you may need to replace the ball hitch. This part supports the back wall of your dryer and helps reduce friction as the drum spins. The part measures 5-inch in diameter and is made from metal. It is also available as part of a kit.

Easy Part #:

EAP418736

Availability:

In Stock - Ships Today

Price:

$44.31

Easy Part #:

EAP425733

Availability:

In Stock - Ships Today

Price:

$11.97

High limit thermostat (high-limit thermostat)

The two-terminal high limit thermostat has a limit of 260 degrees Fahrenheit and acts as a safety mechanism that keeps the dryer from overheating. The thermostat will cut out when the internal dryer temperature reaches 260 and then cuts back in when the temperature drops by 70 degrees Fahrenheit. If your dryer is not heating, you may need to replace the thermostat. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP446428

Availability:

In Stock - Ships Today

Price:

$52.28

Easy Part #:

EAP12579101

Availability:

In Stock - Ships Today

Price:

$6.09

Lint filter (lint trap)

This white dryer lint filter screen collects lint as it passes through the dryer vent.

Easy Part #:

EAP417841

Availability:

In Stock - Ships Today

Price:

$18.29

Drive motor with pulley (motor)

This motor has a double shaft.

Easy Part #:

EAP418132

Availability:

In Stock - Ships Today

Price:

$112.88

Front upper felt seal with adhesive (upper felt seal)

The upper felt seal for your dryer is attached to the top edge of the drum support area, and is held there by a high temperature adhesive. It creates a seal where the dryer door opens and closes, so that heat remains in the dryer while it tumbles. If your old upper felt seal is coming apart, you notice that hot air is leaking out the dryer door, or your clothes are taking too long to dry, you may need to replace the seal. When you order this part, it comes with the upper felt seal, as well as the required high-temperature adhesive.

Easy Part #:

EAP832644

Availability:

In Stock - Ships Today

Price:

$17.36

Screw (drum vane screw)

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP417463

Availability:

In Stock - Ships Today

Price:

$7.93

1-15 of 85