41790802990 Kenmore Washer Dryer Combo Parts List

1-15 of 228

Rear drum bearing kit (assembly-shaft (ballhitch))

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:
EAP459829
Availability:
In Stock - Ships Today
Price:
$44.97

Upper drum glide (glide-drum)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP470317
Availability:
In Stock - Ships Today
Price:
$32.75

Drum support bearing (bearing-shaft)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP418807
Availability:
In Stock - Ships Today
Price:
$5.80

Dryer lint screen (trap-lint)

This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manual when installing this part.

Easy Part #:
EAP12585473
Availability:
In Stock - Ships Today
Price:
$38.52

Drive v-belt (belt-washer)

This drive belt is designed to ride on the pulley until the basket gets up to speed. If your washer drum will not agitate or spin, you may need to replace your belt. It is recommended to disconnect the power to your washer and shut off the water supply before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:
EAP1146950
Availability:
In Stock - Ships Today
Price:
$23.15

Multi-rib drum belt (belt-dryer)

This belt helps rotate from the drive motor to the drum.

Easy Part #:
EAP3408299
Availability:
In Stock - Ships Today
Price:
$16.22

Door catch (catch-door)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:
EAP418433
Availability:
In Stock - Ships Today
Price:
$51.22

Front lower drum seal (seal-basket lower)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:
EAP460194
Availability:
In Stock - Ships Today
Price:
$31.84

Thermal limiter - limit 220 (thermal limiter)

This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out. If your dryer overheats, will not start, takes too long to dry, or has no heat or not enough heat, you will need to replace the fuse because it cannot be reset. This is a genuine OEM part. It is recommended to disconnect the power to your dryer before starting your repair.

Easy Part #:
EAP419402
Availability:
In Stock - Ships Today
Price:
$22.13

Timer knob (knob-timer, white)

This knob accepts a D-shaped shaft.

Easy Part #:
EAP418916
Availability:
In Stock - Ships Today
Price:
$44.37

Heater assembly (heater-hsg assembly)

This dryer heating assembly has 5/16" terminal on the housing.

Easy Part #:
EAP2378363
Availability:
In Stock - Ships Today
Price:
$139.85

High limit thermostat (thermostat-safety)

The two-terminal high limit thermostat has a limit of 260 degrees Fahrenheit and acts as a safety mechanism that keeps the dryer from overheating. The thermostat will cut out when the internal dryer temperature reaches 260 and then cuts back in when the temperature drops by 70 degrees Fahrenheit. If your dryer is not heating, you may need to replace the thermostat. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP446428
Availability:
In Stock - Ships Today
Price:
$74.18
Easy Part #:
EAP1152204
Availability:
In Stock - Ships Today
Price:
$13.72

Dryer drum bearing bracket (bracket-bearing)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:
EAP12579101
Availability:
In Stock - Ships Today
Price:
$10.02

Water inlet valve (valve-water)

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. If your washer will not stop filling with water, is leaking, or will not fill with water, you may need to replace the water inlet valve. Please make sure to disconnect the power to your washer before you start your repair. This water inlet valve is a genuine OEM part.

Easy Part #:
EAP815509
Availability:
In Stock - Ships Today
Price:
$93.62
1-15 of 228