41797862790 Kenmore Washer Dryer Combo Parts List

Search the entire 41797862790 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 15
1-15 of 216

Rear drum bearing kit (shaft assembly)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:
EAP459829
Availability:
In Stock
Price:
$52.07

Upper drum glide (glide-drum)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP470317
Availability:
In Stock
Price:
$34.67

Drum support bearing (bearing-shaft)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP418807
Availability:
In Stock
Price:
$5.21

Dryer lint screen (trap-lint)

This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manual when installing this part.

Easy Part #:
EAP12585473
Availability:
In Stock
Price:
$37.91

Drive v-belt (belt-washer)

This drive belt is designed to ride on the pulley until the basket gets up to speed. If your washer drum will not agitate or spin, you may need to replace your belt. It is recommended to disconnect the power to your washer and shut off the water supply before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:
EAP1146950
Availability:
In Stock
Price:
$20.58

Door catch (catch-door)

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:
EAP418433
Availability:
In Stock
Price:
$61.61

Multi-rib drum belt (belt-dryer)

This belt helps rotate from the drive motor to the drum.

Easy Part #:
EAP3408299
Availability:
In Stock
Price:
$17.17

Front lower drum seal (seal-basket lower)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:
EAP460194
Availability:
In Stock
Price:
$33.70

M series ignition coil kit (coil-secondary)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they will not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:
EAP470049
Availability:
In Stock
Price:
$19.63

Timer knob (knob-timer, white)

This knob accepts a D-shaped shaft.

Easy Part #:
EAP418916
Availability:
In Stock
Price:
$44.37

Screw-in plastic leveling leg (leg-leveling, with pad)

Sold individually.

Easy Part #:
EAP1152204
Availability:
In Stock
Price:
$10.89

Dryer drum bearing bracket (bracket-bearing)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:
EAP12579101
Availability:
In Stock
Price:
$10.04

Water inlet valve (valve-water)

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. If your washer will not stop filling with water, is leaking, or will not fill with water, you may need to replace the water inlet valve. Please make sure to disconnect the power to your washer before you start your repair. This water inlet valve is a genuine OEM part.

Easy Part #:
EAP815509
Availability:
In Stock
Price:
$89.20

Remote style pump with motor (pump-complete)

Use this with either a top load or front load washer. This pump has an horizontal mount.

Easy Part #:
EAP417325
Availability:
In Stock
Price:
$174.01

Tub seal assembly (seal-tub)

This tub seal helps prevent any leaking around the transmission of your washer. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:
EAP459481
Availability:
In Stock
Price:
$70.35
< PREV 1 2 3 4 5 6 ... 15
1-15 of 216