Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

41798989820 Kenmore Dryer Parts List

1-15 of 124

Rear drum bearing kit (nut, flat part of rear bearing kit.)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP459829

Availability:

In Stock - Ships Today

Price:

$52.07

Drum belt (belt)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP1148434

Availability:

In Stock - Ships Today

Price:

$14.30

Upper drum glide (glide, drum)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP470317

Availability:

In Stock - Ships Today

Price:

$34.67

Drum support bearing (bearing part of rear bearing kit.)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock - Ships Today

Price:

$5.21

Door catch

The door catch helps keep the door closed while the machine is running. If your dryer will not start or the door will not close, you may need to replace the door catch. This is a genuine OEM part. Please remember to disconnect the power to your dryer before you start the repair.

Easy Part #:

EAP418433

Availability:

In Stock - Ships Today

Price:

$61.61

M series ignition coil kit (coil, secondary)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they will not hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP470049

Availability:

In Stock - Ships Today

Price:

$19.63

Idler pulley assembly (idler assembly)

The idler pulley assembly provides the tension required for a flat belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel. If your dryer is noisy or will not tumble you may need to replace the idler pulley. This is a genuine OEM part.

Easy Part #:

EAP457526

Availability:

No Longer Available

Dryer drum bearing bracket (bracket, brg sprt part of rear bearing kit.)

This drum bearing bracket is for dryers. Drum bearing bracket holds and supports the drum bearing

Easy Part #:

EAP12579101

Availability:

In Stock - Ships Today

Price:

$10.04

Door strike

The door strike works in conjunction with the dryer door. The male piece of the door strike is the piece that activates the door switch once the dryer door is closed. If your dryer won’t start, or the door won’t open/close, you may need to replace the door strike. This part is made from metal and measures approximately 1 inch. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP455020

Availability:

In Stock - Ships Today

Price:

$15.21

Flame sensor (sensor)

This part senses the flame for heat allowing the gas valve to open.

Easy Part #:

EAP459818

Availability:

In Stock - Ships Today

Price:

$28.46

Igniter (ignitor)

This part ignites the gas within the dryer. Be sure to not handle this igniter by the gray part as it is very fragile.

Easy Part #:

EAP900236

Availability:

In Stock - Ships Today

Price:

$55.38

Front drum seal (seal)

Used with dryers with a 27-inch drum.

Easy Part #:

EAP459776

Availability:

On Order

Price:

$27.74

Levelling leg (foot bolt (4))

Sold individually.

Easy Part #:

EAP418072

Availability:

No Longer Available

Seal

Adhesive is sold separately.

Easy Part #:

EAP975849

Availability:

In Stock - Ships Today

Price:

$7.86

Single clip (clip, guide (4))

Sold individually.

Easy Part #:

EAP459782

Availability:

No Longer Available

1-15 of 124