58714001991 Kenmore Dishwasher Parts List

Upper dishrack track end cap (slide cap)

The white upper rack track stop is used to prevent the upper dish rack from sliding off the slide rail. If your rack is falling off the track, or the track stop has broken or is missing you may need to replace the track stop. This part is a genuine OEM part and is sold individually.

Kickplate grille - black (kick plate)

This part is the replacement kickplate grille or toe panel for your dishwasher. It is black in color and is approximately 7 inches by 24 inches. The kickplate grille is a decorative panel that covers up the opening at the bottom of your dishwasher. If your kickplate is damaged or missing, this is the part that will replace it. To replace the kickplate grille, simply unscrew it from the bottom of your dishwasher, then line up the new kickplate with the locator pins and screw it back into place. This part is an OEM part from the manufacturer and is sold individually.

Dishwasher water inlet tubing (tubing)

The tubing carries water from the water inlet valve to the tub.

Dishwasher circulation motor & pump kit with harness (motor kit w)

This part has been redesigned by the manufacturer and may appear different, but will function the same. This kit helps propel the water through the spray arms.

Dishwasher filter (filter)

This filter is for dishwashers. The filter removes food particles and debris from the water to prevent the drain from clogging. Follow the instructions in the manual when installing this part.

Kickplate grille - black (plate)

This kickplate grille is attached to the bottom of the dishwasher.

Filter base (base)

Located at the bottom of the dishwasher, this filter keep large particles of food and foreign objects away from the pump.

Basket (silverware basket)

This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass through it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.

Upper dishrack slide (upper rack slide)

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack. The mounting screws are not included.

O-ring - rear (o ring)

O-ring - front (o ring)

Rack assembly upper grey (rack)

Lower dishrack assembly (rack)

This dishrack includes the wheels.

Lower spray arm nut (nut)

Fits between the lower spray arm and the filter.

Kit - includes 8 screws & 8 washers (roller screw pack)

Use for the upper rack rollers on the upper rack of your dishwasher.