58715203800 Kenmore Dishwasher Parts List

Rack assembly lower silver (rack assembly)

This lower dishrack assembly comes with 8 rollers enabling it to roll in and out with ease. The dishrack is approximately 22 inches long x 20 inches wide. The dishrack holds dishes in place during the dishwashing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, the part should be replaced. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly. This part is also known as a dish rack or a dishwasher rack.

Lower spray arm support (cover)

This plastic cover and stem assembly helps hold the lower spray arm in place.

Detergent dispenser (detergent diode)

This part releases the detergent and rinse aid into the dishwasher during the proper cycles. If your dishes are not cleaned properly or will not dispense detergent, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to the dishwasher before starting your repair. NOTE: Color may vary but the part will function the same as the original.

Delivery tube gasket (gasket)

Sold individually.

Vent asmy, blower (vent assembly)

This part is located behind the kickplate. The blower vent assembly opens during the drying cycle to release moisture.

Drain pump (drain pump assembly)

The pump ejects the water from the unit.

Heating element (heater)

This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher. NOTE: Brass nuts are NOT included. Must be ordered separately.

Circulation pump and motor kit (motor kit)

This kit includes the 2 o-rings.

Kickplate grille - black (kick plate)

This part is the replacement kickplate grille or toe panel for your dishwasher. It is black in color and is approximately 7 inches by 24 inches. The kickplate grille is a decorative panel that covers up the opening at the bottom of your dishwasher. If your kickplate is damaged or missing, this is the part that will replace it. To replace the kickplate grille, simply unscrew it from the bottom of your dishwasher, then line up the new kickplate with the locator pins and screw it back into place. This part is an OEM part from the manufacturer and is sold individually.

Dishwasher water inlet tubing (water inlet tube)

The tubing carries water from the water inlet valve to the tub.

Soil trap (trap)

Tine bracket (bracket)

This bracket is designed for use in dishwashers, and it is a genuine replacement part. It is used in the upper dishrack to hold tines in place. This part is made out of plastic. Please note it is sold individually, therefore you will need to order the quantity you require. NOTE: This part has been updated by the manufacture but will still work like the original.

Kickplate grille - black (toe plate)

This kickplate grille is attached to the bottom of the dishwasher.

Filter base (base)

Located at the bottom of the dishwasher, this filter keep large particles of food and foreign objects away from the pump.

Water delivery tube grommet (grommet)

This grommet fits on the spray arm of your dishwasher. This replacement part connects and seals the spray arm to the water hose that supplies water to the dishwasher tub. Be sure to shut off water supply to your appliance before completing this repair. This part is 3 inches in diameter and is off-white in color.