Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

58716072200 Kenmore Dishwasher Parts List

1-15 of 115

Dishwasher bottom door gasket (door gasket)

This gasket goes on the bottom of the dishwasher door to create a tight seal between the tub and the outer edge of the door. If the gasket is cracked or broken, it will need to be replaced to keep water from leaking out on to the floor. The gasket is approximately 23” long and is a genuine OEM part. It is recommended that once you have installed the gasket to leave the door closed for a few hours to make sure the gasket is properly sealed.

Easy Part #:

EAP9495545

Availability:

In Stock

Price:

$18.83

Lower rack assembly - grey (lower rack)

This part is a genuine OEM part. This white lower dish rack assembly comes with eight light-gray rollers for easy access. The dish rack is approximately 21 inches wide x 22 inches deep. The dish rack holds dishes in place during the dish washing cycle. If you see rust spots on the dishes, the lower rack will not pull out, or the lower rack is visibly rusted or damaged, you will need to replace the part. Other common symptoms include: unusual or loud noises coming from the unit, or the dishes on the lower rack not being washed properly.

Easy Part #:

EAP17219605

Availability:

On Order

Price:

$89.28

Easy Part #:

EAP12585623

Availability:

In Stock

Price:

$28.06

Dishwasher tub gasket - gray (gasket)

The door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking you may need to replace the door gasket. This gray door gasket is made of rubber and is a genuine OEM part.

Easy Part #:

EAP8260227

Availability:

In Stock

Price:

$27.15

Wheel & bushing ass (wheel)

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.

Easy Part #:

EAP16745479

Availability:

In Stock

Price:

$5.82

Roller tub gray (roller)

The dishrack support roller attaches to the inside of the tub by a screw, to help support the upper rack. There are eight total inside the tub, four on each side. This support roller is made of plastic and is approximately 1 1/2” in diameter. The screw is not included with the roller, you can reuse the existing screw. This is a genuine part and is sold individually.

Easy Part #:

EAP11770690

Availability:

In Stock

Price:

$13.30

Silverware basket (cover basket)

This is a basket for washing flatware or silverware in your dishwasher. It is located on the lower rack. If your silverware basket is damaged or worn out, you should replace it. The basket comes with three sections and includes the covers. No tools are required for this repair. This is a genuine OEM part.

Easy Part #:

EAP17219661

Availability:

In Stock

Price:

$16.66

Door latch and gasket (latch gasket)

Black in color. No longer available in almond. This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.

Easy Part #:

EAP979852

Availability:

In Stock

Price:

$49.01

Water inlet valve - 120v 60hz (valve)

This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner of the front of your dishwasher. The attaching solenoids on the valve open and close to release the desired amount of water needed in your dishwasher. If your dishwasher is leaking, will not fill with water, is not draining, or not cleaning the dishes properly, you may need to replace the water inlet valve. This valve has 120 volts and 60 Hz. Please be sure to disconnect the power to your dishwasher before starting your repair. This water inlet valve is a genuine OEM part.

Easy Part #:

EAP1990907

Availability:

In Stock

Price:

$51.37

Rack assembly upper (rack assembly)

The upper dishrack is used to hold your dishes in place while the dishwasher goes through the wash cycles. Over time the dishrack can become damaged, start to rust, or be missing rollers, and the dishrack will need to be replaced. This rack is white in color with light gray rollers and measures approximately 23 Inch x 23 Inch. This is a genuine OEM part.

Easy Part #:

EAP17219604

Availability:

In Stock

Price:

$91.79

Door spring (spring)

Sold individually.

Easy Part #:

EAP724932

Availability:

In Stock

Price:

$43.03

Heating element brass nut (heating element mounting nut)

The heating element nut is used to install and secure the heating element in your dishwasher. If your dishwasher is leaking you may need to replace the nut. The manufacturer suggests replacing replace both nuts at the same time. This heating element nut is a genuine OEM part and is sold individually.

Easy Part #:

EAP1524878

Availability:

In Stock

Price:

$7.18

Dishwasher drain hose (hose)

The drain hose connects to the pump located below the lower spray arm. It aids in proper dishwasher drainage by carrying the drain water from the dishwasher drain pump to the kitchen sink drain. The drain hose measures 8 feet long. If your drain hose becomes damaged or cracked it will cause water to leak on the floor and you will need to replace the hose. This hose is white and black in color, made of plastic and is a genuine OEM part. Please make sure you shut off the water supply and disconnect the power to the dishwasher before starting your repair.

Easy Part #:

EAP9494138

Availability:

In Stock

Price:

$26.33

Tine bracket (bracket)

The tine row bracket helps to hold the tine row in place on your dish rack. If your clip is broken or cracked, you should replace it. This part measures approximately 1 1/2” long. The tine row bracket is made from plastic, is gray in color, and is a genuine OEM part. It is sold individually.

Easy Part #:

EAP2330942

Availability:

In Stock

Price:

$5.06

Detergent and rinse dispenser with cap (dispenser)

The manufacturer has redesigned this part and it may appear different than the original, but will have the same functionality. This part releases the detergent and rinse aid into the dishwasher.

Easy Part #:

EAP1524979

Availability:

In Stock

Price:

$62.62

1-15 of 115