Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

58717345790 Kenmore Dishwasher Parts List

1-15 of 131

Wheel & bushing ass (wheel)

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.

Easy Part #:

EAP16745479

Availability:

In Stock

Price:

$5.82

Roller tub gray (roller)

The dishrack support roller attaches to the inside of the tub by a screw, to help support the upper rack. There are eight total inside the tub, four on each side. This support roller is made of plastic and is approximately 1 1/2” in diameter. The screw is not included with the roller, you can reuse the existing screw. This is a genuine part and is sold individually.

Easy Part #:

EAP11770690

Availability:

In Stock

Price:

$13.30

Door latch and gasket (latch gasket)

Black in color. No longer available in almond. This door latch prohibits the dishwasher from operating when the door is open. The gasket is used around the door to keep the dishwasher from leaking.

Easy Part #:

EAP979852

Availability:

In Stock

Price:

$49.01

Water inlet valve - 120v 60hz (water valve)

This water inlet valve is usually located behind the lower kickplate panel in either the right or left corner of the front of your dishwasher. The attaching solenoids on the valve open and close to release the desired amount of water needed in your dishwasher. If your dishwasher is leaking, will not fill with water, is not draining, or not cleaning the dishes properly, you may need to replace the water inlet valve. This valve has 120 volts and 60 Hz. Please be sure to disconnect the power to your dishwasher before starting your repair. This water inlet valve is a genuine OEM part.

Easy Part #:

EAP1990907

Availability:

In Stock

Price:

$51.37

Heating element brass nut (heating element mounting nut)

The heating element nut is used to install and secure the heating element in your dishwasher. If your dishwasher is leaking you may need to replace the nut. The manufacturer suggests replacing replace both nuts at the same time. This heating element nut is a genuine OEM part and is sold individually.

Easy Part #:

EAP1524878

Availability:

In Stock

Price:

$7.18

Wheel&bushing asy, upper,black (wheel bushing)

The upper dishrack roller and axel kit comes with two pieces, a wheel and an axle. This kit is made for your dishwasher. Both pieces measure to be roughly one square inch each, they are made entirely of plastic, and are white in color. The purpose of these parts is to allow your dishrack to roll easily on the support rails. This kit is sold individually and contains only one wheel and one axle. Please order the required quantity for your repair. If your dishrack is having trouble rolling in and out you may need replace your rollers and axles.

Easy Part #:

EAP17219660

Availability:

In Stock

Price:

$4.17

Door strike (strike)

This door strike is mounted to the top of the dishwasher cabinet. This part catches the door handle to keep it closed.

Easy Part #:

EAP2331186

Availability:

In Stock

Price:

$33.21

Upper dishrack track end cap (slide cap)

The white upper rack track stop is used to prevent the upper dish rack from sliding off the slide rail. If your rack is falling off the track, or the track stop has broken or is missing you may need to replace the track stop. This part is a genuine OEM part and is sold individually.

Easy Part #:

EAP452590

Availability:

In Stock

Price:

$35.57

Dishwasher water inlet tubing (tubing)

The tubing carries water from the water inlet valve to the tub.

Easy Part #:

EAP12746654

Availability:

In Stock

Price:

$14.65

Basket (silverware basket)

This is a basket for your dishwasher. It sits in the lower dishrack and holds small utensils during a washing cycle. This basket has six smaller sections where you can separate your cutlery into specific groups. This silverware holder is made entirely of plastic with a crisscross pattern allowing water and small food particles to pass through it during the cleaning process. This model is grey and roughly 14 inches long, about 6 inches high, and almost 4 inches thick.

Easy Part #:

EAP16218301

Availability:

In Stock

Price:

$27.39

Pan head screw (screw)

Sold Individually. Order quantity required.

Easy Part #:

EAP1525804

Availability:

In Stock

Price:

$12.24

Upper dishrack slide (upper rack slide)

This slide is mounted to each side of the upper cabinet wall. The dishrack wheels roll inside this track, which guides the upper rack. The mounting screws are not included.

Easy Part #:

EAP1525080

Availability:

In Stock

Price:

$47.80

Lower dishrack kit (rack)

This kit includes the wheels and the silverware basket.

Easy Part #:

EAP2339499

Availability:

No Longer Available

Kit - includes 8 screws & 8 washers (roller screw pack)

Use for the upper rack rollers on the upper rack of your dishwasher.

Easy Part #:

EAP470437

Availability:

In Stock

Price:

$13.91

Faucet adapter coupling (adapter)

This faucet adapter is used with some portable dishwashers and washers to provide a means for draining and filling by connecting a water supply hose to a sink faucet. This part is used for faucets with inside or outside threads. For female connection (outside) just remove the washers. This is a genuine OEM part.

Easy Part #:

EAP7321390

Availability:

Special Order

Price:

$36.13

1-15 of 131