59665234400 Kenmore Refrigerator Parts List

Search the entire 59665234400 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Water tube kit (tube, plastic (series 10))

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72-inch in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:
EAP11730901
Availability:
In Stock - Ships Today
Price:
$30.10

Water inlet valve - 120v 60hz (valve, water (series 10))

The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side or bottom mount refrigerators.

Easy Part #:
EAP11743551
Availability:
In Stock - Ships Today
Price:
$61.51

Freezer door handle (handle, fz dr (bsq) (series 10))

Bisque in color. Screws are not included.

Easy Part #:
EAP11743616
Availability:
In Stock - Ships Today
Price:
$74.12

Electronic control board (control board kit (jazz) (series 10))

This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.

Easy Part #:
EAP11755733
Availability:
In Stock - Ships Today
Price:
$124.11

Ice bucket (pan, ice (series 10))

The ice bucket is used to hold the ice cubes in the freezer section that are released from the ice maker until ready to be used. If the bin becomes lost or damaged, you will need to replace the bin. The bin is white in color, made of plastic, and measures approximately 15” x 12”. This is a genuine OEM part.

Easy Part #:
EAP11743447
Availability:
In Stock - Ships Today
Price:
$76.21

Crisper glass (glass, crisper (series 10))

Glass Only. Frame sold separately.

Easy Part #:
EAP11743718
Availability:
In Stock - Ships Today
Price:
$102.49

Deli drawer glide - right side (glide (rt) (series 10))

This is a deli drawer glide for the right side of your refrigerator. It allows the deli drawer to glide in and out smoothly. In order to access your glider, you will have to remove drawer and shelf, and unscrew the existing screws. Reverse and reinstall. This part is approximately 14.5 inches long, and made of white plastic.

Easy Part #:
EAP11743441
Availability:
In Stock - Ships Today
Price:
$8.30

Humidity control slide (slide, humidity control (series 10))

This part mounts on the crisper drawer cover and is used to limit the amount of air that gets into the crisper.

Easy Part #:
EAP11743638
Availability:
In Stock - Ships Today
Price:
$11.06

Glide - left side (glide (lt) (series 10))

This is a replacement pan glide for your refrigerator. The pan glide can be found attached to the refrigerator shelf, and allows the pan to slide in and out efficiently. If your refrigerator pan will not slide in or out of place properly, or if the pan will not stay in place, you may need to replace the glide. There is a pan glide on the left and the right side of the refrigerator shelf. This part is the left side glide, so be sure to determine whether you need to replace the left glide or the right glide. This part is made of white plastic, and is approximately 15 inches long.

Easy Part #:
EAP11743442
Availability:
In Stock - Ships Today
Price:
$6.47

Single roller (roller (series 10))

This wheel is sold individually. It is located on the bottom of the refrigerator.

Easy Part #:
EAP11738235
Availability:
In Stock - Ships Today
Price:
$9.49

Freezer evaporator fan motor - 115v 60hz (motor, evap fan (series 10))

This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will covert the heat into cool air, which is then circulated.

Easy Part #:
EAP11748697
Availability:
In Stock - Ships Today
Price:
$84.38

Ice maker shut-off arm (arm, ice maker (series 10))

This part signals the icemaker to stop making ice once the bin has reached a desired amount.

Easy Part #:
EAP11743571
Availability:
In Stock - Ships Today
Price:
$38.50

Thermistor (thermistor kit (series 10))

Long harness thermistor kit.

Easy Part #:
EAP2003772
Availability:
In Stock - Ships Today
Price:
$32.65

Tray (ice tray (series 10))

This fourteen cube ice cube tray is eleven inches long. It is all white in color and is made entirely of plastic.

Easy Part #:
EAP11745970
Availability:
In Stock - Ships Today
Price:
$7.80

Defrost thermostat (thermostat, defrost includes thermostat and 2 wire nuts. (series 10) (non-illus))

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

Easy Part #:
EAP11743535
Availability:
In Stock - Ships Today
Price:
$53.01