Parts for Kenmore Models 664RF3020XYN1

Bake element - 2600w 240v (bake element)

The 2600 watt 240 volts bake element is located inside the oven on the bottom to supply heat while baking. This closed hinged style bake element is 15 3/4-inch long 16 5/8-inch wide, terminal depth is 3-inch and they are 1 3/4 inches apart. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Easy Part #:: EAP11740695

Availability:: In Stock - Ships Today

Price:: $60.04

Drip bowl - 8 inch (drip bowl)

This eight-inch chrome drip bowl is intended for use with rolled terminal style plug-in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP2366563

Availability:: In Stock - Ships Today

Price:: $9.45

Surface burner plug-in block kit (receptacle element)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock - Ships Today

Price:: $10.41

Surface burner - 8 inch - 2600w (unit, surface, 8")

This 8” plug in style surface burner element provides heat to the cooking surface of your range. The burner element has looped terminal ends, 2600 watts, and a 5-turn. If the burner element is not heating it could be the element or the burner switch. You can use a multimeter to test the element or the switch for continuity. This is a genuine OEM part; the manufacturer recommends replacing the burner receptacle when you replace the surface burner element. Please make sure the power has been disconnected and the element is turned off and had time to cool before starting your repair. This part is sold individually.

Easy Part #:: EAP11743367

Availability:: In Stock - Ships Today

Price:: $26.17

Standard y-frame range surface burner (6" element)

This standard Y-frame 6” surface element is a genuine OEM part that supplies heat to the cooking surface on your range. It has four turns, a black center medallion, looped terminal ends and carries 15000 tts. If your element is not heating, you may need to replace it. Please be sure to disconnect the power to your range before starting your repair. The manufacturer suggests replacing the receptacle at the same time.

Easy Part #:: EAP11743366

Availability:: In Stock - Ships Today

Price:: $29.67

Touch-up paint - white (tuchup)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:: EAP385132

Availability:: In Stock - Ships Today

Price:: $6.96

Infinite switch - 8 inch (infinite switch)

This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Easy Part #:: EAP11740775

Availability:: In Stock - Ships Today

Price:: $50.28

Broil element - 240v (broiler element)

If your broil element is no longer heating or it has shorted out, you may need to replace it. You can use a multimeter to test the broil element for continuity. The three loop broil element is located on the roof of the oven cavity to supply heat for broiling. The element has push-on terminals and measures 12-inch wide and 19-inch long. This is a genuine OEM part. Please remember to disconnect the power to the oven before starting your repair.

Easy Part #:: EAP11743368

Availability:: In Stock - Ships Today

Price:: $59.03

Surface burner stabilizer clip kit (clip)

This kit contains one clip, a screw, and a nut.

Easy Part #:: EAP389114

Availability:: In Stock - Ships Today

Price:: $7.91

Infinite control switch, 6" (infinite switch)

This switch controls the stove top 6" surface burner.

Easy Part #:: EAP11740785

Availability:: In Stock - Ships Today

Price:: $45.13

Cover screw (screw)

Sold individually.

Easy Part #:: EAP11740701

Availability:: In Stock - Ships Today

Price:: $4.54

2 piece broiler pan (broiler pan)

The broiler pan and insert allows you to cook on a stable surface while allowing the liquid to drain into the pan below, making clean up easier. The measurements for the pan set are 1-1/2-inch x 12-3/4-inch x 16-3/4-inch and is a genuine OEM part.

Easy Part #:: EAP971245

Availability:: In Stock - Ships Today

Price:: $31.65

Spray paint - 12 oz. - white (spray)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.