66515595791 Kenmore Dishwasher Parts List

Lower sprayarm seal (bearing for dishwasher spray arm. This bearing is mounted underneath the spray arm.)

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

Dishwasher door gasket - gray (dishwasher door gasket. The door gasket creates a seal around the dishwasher to prevent water from leaking out. If the gasket is torn, the dishwasher)

If your dishwasher is leaking during use you may need to replace the gasket. The door gasket wraps around the sides and top of the dishwasher door and provides a waterproof seal between the tub and the door. It is gray in color and made of rubber. Once you have installed the door gasket it is recommend to close the dishwasher door and leave it closed for a few hours to make sure the door gasket properly seals. This is a genuine OEM part.

Water inlet valve (dishwasher water inlet valve. If the dishwasher won't fill properly, then the water valve is likely restricted and will need replacement.)

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. NOTE: As per the manufacture this part has been updated from the original part. You may need to order an elbow (# W10685193) for the new designed valve to work.

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Spring, lid (soap cup cover spring)

The lid spring helps open the detergent dispenser cover, which is located on the inside of the door panel, when it reaches the cycle to dispense soap into the dishwasher. If the lid will not open or the detergent is not dispensing, you may need to replace the lid spring. This is a genuine OEM part.

Hose clamp

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.

Rinse aid cap (rinse aid cap, *no o-ring seal needed for new style cap.)

This cap does not require the use of a o-ring seal.

Pin (lid hinge) (pin for soap cup door)

The lid hinge pin or detergent lid pin on your dishwasher helps dispense your dish detergent when your dishwasher is running. The pin fits with the dispenser lid and allows the lid to pop open and dispense detergent. It is a small, plastic pin that is approximately 3 inches in length. Due to its small size, the pin can be damaged relatively easily, and if your pin is broken or missing, it will need to be replaced. This product is sold individually.

Soap dispenser cover (soap cup cover)

This part covers your soap dispenser and is spring loaded.

Door panel insert (door panel insert, black one side, white the other)

This panel is reversible, black on one side, white on the other side.

Soap cup latch kit (latch kit, soap cup door)

The latch kit includes the latch and the snap. This part is used to keep the soap dispenser cover closed until activated. It is located on the inside of the door panel on the right side. If your dishwasher is not dispensing detergent, or the latch is broken or damaged, you may need to replace the latch kit. This is a genuine OEM part.

Spray paint - 12 oz. - white (spray paint, white, 12 ounces)

Spray paint is designed to help cover up any scratches or chips on your appliances. This spray pant is white in color and comes in a 12 oz aerosol can. Please make sure to clean the area that requires touch up to avoid any old paint or dirt getting into the fresh paint. When using the spray paint it is recommended to wear gloves and a protective mask. Make sure to shake the can well before using and to spray a few inches away from the surface for best results. Please wait until the paint is dried before using the appliance. This is a genuine OEM part.

High limit thermostat (dishwasher high-limit thermostat.)

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.

Dishrack (gray upper dishrack kit. The rack does not come assembled. This is a replacement rack for some models.)

Water deflector (deflector, tank)

This part is located in the lower front corners of the dishwasher tub. They keep the water away from the corners of the appliance and therefore eliminating the rush of water behind the door.