Hello!

You're visiting the Easy Appliance Parts site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

66513973K013 Kenmore Dishwasher Parts List

1-15 of 163

Dishwasher dish rack adjuster kit - left and right side (adjuster)

The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.This is a genuine OEM part.

Easy Part #:

EAP10064063

Availability:

In Stock - Ships Today

Price:

$37.85

Door balance link kit (door link/balance kit)

The door balance kit helps support the weight of the dishwasher door while it opens and closes. If the spring to the door is damaged/broken or the door is not opening and closing properly you will need to replace this part. This door kit includes 2 door balance links and 2 door balance mounts with wheels for the left and right side of the door. This is a genuine OEM part.

Easy Part #:

EAP972325

Availability:

In Stock - Ships Today

Price:

$23.65

Rack stop clip (stop)

This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually.

Easy Part #:

EAP11750071

Availability:

In Stock - Ships Today

Price:

$6.51

Silverware basket

This is a basket for washing flatware or silverware in your dishwasher. This part has been updated and may differ in appearance but will function the same as the original.

Easy Part #:

EAP11722963

Availability:

In Stock - Ships Today

Price:

$59.29

Easy Part #:

EAP11750057

Availability:

In Stock - Ships Today

Price:

$27.21

Tine pivot

This tine pivot clip helps hold the tine row in place on your dish rack. If your clip is broken or cracked, you should replace it. This clip is made from plastic and is a genuine OEM part. It is sold individually.

Easy Part #:

EAP11748190

Availability:

In Stock - Ships Today

Price:

$8.20

Dishwasher positioner (positioner)

Also known as rack adjuster. Sold individually. This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster arm in the right position on the dishrack. The most common reason for replacing the strap is if the rack will not stay in its desired position. This part is sold individually. There are no tools needed to replace the positioner.

Easy Part #:

EAP11750093

Availability:

In Stock - Ships Today

Price:

$36.04

Lower dishrack (dishrack)

This genuine OEM Whirlpool lower dishrack is used to hold the dishes in place during the operation of the cycles. The lower rack is gray in color and includes the rack only. You can remove the rollers from the old rack and use them on the new dish rack.

Easy Part #:

EAP10057160

Availability:

In Stock - Ships Today

Price:

$134.17

Tine row

The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will need to be replaced. The manufacturer has updated the tine row, it may look different but it will still fit like the original. This part measures approximately 19 1/2” long and is made of metal. This is a genuine OEM part and is sold individually.

Easy Part #:

EAP10057161

Availability:

In Stock - Ships Today

Price:

$53.90

Dishwasher dishrack adjuster (adjuster)

Sold individually. This dishrack adjuster is for dishwashers. Dishrack adjuster lets you change the height of the dishwasher's upper rack. Wear work gloves to protect your hands when installing this part.

Easy Part #:

EAP11750092

Availability:

In Stock - Ships Today

Price:

$37.50

Drawer track (track)

This drawer track or rack slider bar is for use in your dishwasher. It connects to the upper dish rack, and allows the rack top slide in and out. You may need to replace this part if your old rack will not slide out, or your old drawer track is warped and causes the dish rack wheels to fall off or jam. You will need a flat blade screwdriver to remove the rear stop, so you can pull out the drawer track.

Easy Part #:

EAP11750072

Availability:

In Stock - Ships Today

Price:

$40.20

Rubber washer (heater terminal nut)

The black heating element washer goes between the heating element and the dishwasher tub to form a seal where the element attaches to prevent water from leaking during its cycle. If the washer goes bad it will cause water to leak out on to the floor. This part is made of rubber, measures approximately 1” in diameter and is sold individually. This is a genuine OEM part.

Easy Part #:

EAP11743934

Availability:

In Stock - Ships Today

Price:

$6.17

Spinner kit (spinner)

The water feed tube spinner is also called the 3rd-level spinner. It is located at the top inside the dishwasher tub. This part works like a little spray arm at the top of your dishwasher that distributes water across the top dish rack to help clean the dishes below. If your dishes are not being cleaned properly, or the spray arm is not spraying water, it could be clogged or damaged and will need to be replaced. This spinner is white in color, made of plastic and is a genuine OEM part.

Easy Part #:

EAP972316

Availability:

In Stock - Ships Today

Price:

$22.01

Easy Part #:

EAP11753379

Availability:

In Stock - Ships Today

Price:

$67.30

Tine row - kit of 2 (tine row)

This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines have become corroded and are leaving marks on your dishes, you may want to consider replacing it. To do so, simply snap off the tine row pivots that hold the tine row in place, and remove the existing tine row. Then, simply replace it with the new tine row, and snap the tine row pivots back into place. When you order this part, it will come with a set of 2 tine rows. This is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP10057154

Availability:

In Stock - Ships Today

Price:

$45.51

1-15 of 163