666515932000 Kenmore Dishwasher Parts List

1-15 of 184

Door balance link kit (dishwasher door hinge cable and roller kit. Replaces right and left side.)

The door balance kit helps support the weight of the dishwasher door while it opens and closes. If the spring to the door is damaged/broken or the door is not opening and closing properly you will need to replace this part. This door kit includes 2 door balance links and 2 door balance mounts with wheels for the left and right side of the door. This is a genuine OEM part.

Easy Part #:
EAP972325
Availability:
In Stock
Price:
$27.90

Rack track stop (front stop clip for upper dishwasher dishrack)

This gray rack track stop is used for your upper dish rack track to prevent the rack from sliding off the slide rail. If your rack is falling off the track, you may need to replace the track stop. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11746591
Availability:
In Stock
Price:
$10.33

Silverware basket

This is a basket for washing flatware or silverware in your dishwasher. This part has been updated and may differ in appearance but will function the same as the original.

Easy Part #:
EAP11722963
Availability:
In Stock
Price:
$41.71

Mounting bracket (dishwasher upper mounting bracket. Screws sold seprately. Please see related items below.)

The mounting bracket is used to attach the dishwasher to the underside of the counter. The mounting bracket holds the dishwasher in place to keep it from moving during cycles and to keep the dishwasher level. The bracket is made of metal and is approximately 3” in length. The screws are not included with the bracket, they must be ordered separately. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the dishwasher before starting the repair.

Easy Part #:
EAP11745496
Availability:
In Stock
Price:
$15.68

Dishwasher door gasket with strike - black (dishwasher door gasket kit. Includes new strike for door latch. Look for tears, gaps or cuts in the gasket that could cause a dishwasher door leak.)

This one-piece door gasket provides a water tight seal between the tub and the door, to keep water from leaking out of your dishwasher. If your dishwasher is leaking, tears, or there are gaps in your gasket, you may need to replace the door gasket. This black door gasket is made of rubber, includes a new latch strike plate for the door latch, and is a genuine OEM part.

Easy Part #:
EAP5136129
Availability:
In Stock
Price:
$64.81
Easy Part #:
EAP11745525
Availability:
In Stock
Price:
$10.52
Easy Part #:
EAP11746408
Availability:
In Stock
Price:
$64.17

Tine row

The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will need to be replaced. The manufacturer has updated the tine row, it may look different but it will still fit like the original. This part measures approximately 19 1/2” long and is made of metal. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP10057161
Availability:
In Stock
Price:
$50.41

Water inlet valve (dishwasher water inlet valve assembly. If the dishwasher is not filling or under filling the inlet valve may be defective.)

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve will open and close according to the desired amount of water needed.

Easy Part #:
EAP11746141
Availability:
In Stock
Price:
$48.24

Circulation pump and motor (dishwasher circulation pump motor with wash impeller. Poor washing and noise during operation are indications of a circulation pump problem.)

The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.

Easy Part #:
EAP11757388
Availability:
In Stock
Price:
$174.64

Fuse kit (fuse kit with wire harness. Comes with installation instructions. Note: Do not reuse the old harness. The thermal fuse fails to cut off power to the d)

When replacing these fuses the wire harness must be replaced as well. It is located in the control panel. The harness is included with this part now.

Easy Part #:
EAP774514
Availability:
In Stock
Price:
$30.30

Tine row - kit of 2 (dishrack tines, set of two)

This tine row is for the top rack of your dishwasher, and prevents cups, dishes, and other items from moving around during the cycle. If your current row is missing one or more tines, or the tines have become corroded and are leaving marks on your dishes, you may want to consider replacing it. To do so, simply snap off the tine row pivots that hold the tine row in place, and remove the existing tine row. Then, simply replace it with the new tine row, and snap the tine row pivots back into place. When you order this part, it will come with a set of 2 tine rows. This is an OEM part sourced directly from the manufacturer.

Easy Part #:
EAP10057154
Availability:
In Stock
Price:
$46.67

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock
Price:
$7.07

3rd level wash spinner kit (upper spray arm spinner. If the retaining clip is broken, the entire spray arm will need to be replaced.)

This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.

Easy Part #:
EAP734590
Availability:
In Stock
Price:
$19.13

Retainer clip - white (access panel retaining clip, white)

This part is used to hold the access panel in place. Sold individually.

Easy Part #:
EAP11755737
Availability:
In Stock
Price:
$6.90
1-15 of 184