79572303210 Kenmore Refrigerator Parts List

Refrigerator door switch (refrigerator door or freezer drawer switch)

The light switch lights up the interior cabinet of the refrigerator or freezer when the door is opened. If you open the door and the light won’t come on, or the light is always on, you may need to replace the light switch. The switch is white in color and measures approximately 2 1/2”. This is a genuine OEM part. Please remember to disconnect the power before starting the repair.

Evaporator fan motor

This 13-volt evaporator fan motor helps circulate air over the refrigerator coils. These coils will then convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. If the fresh food section is too warm or the motor has failed, you will need to replace the evaporator fan motor. It is suggested to replace the thermistor when replacing the evaporator fan. The fan motor is in the freezer section of the refrigerator, and includes the harness and plug. Please remember to disconnect the power to the refrigerator before starting your repair. This is a genuine OEM part.

Compressor (replacement compressor)

This part must be installed by a licensed and trained LG technician that is able to perform a software update, which is required for the installation of this compressor. Part number CJT30000002 is needed to perform the update. Also, the three pins on the side of the new compressor may be oriented differently than the original. If different, when installing the new compressor the compressor electrical connector must be rotated 45 degrees counter-clockwise.

Fan assembly (evaporator fan blade)

Leg assembly,adjust

Damper,motor support (rubber for evaporator fan motor)

Capacitor,electric appli (radial capacitor)

Condenser fan motor (motor, condenser fan)

Screw,customized

Drier assembly (drier)

Defrost sensor assembly (defrost thermistor with fuse)

Refrigerator compressor overload protector (overload protector)

The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.

Roller

Damper,motor support (rubber,motor-f)

Thermistor assembly,ptc (compressor relay & overload)