79571063011 Kenmore Refrigerator Parts List

Plate assembly,front (refrigerator flipper assembly)

This is a replacement mullion rail for your French door-style refrigerator. You will typically find the mullion rail on the left side refrigerator door. The mullion rail helps to keep the refrigerator door closed. If the door will not close properly or if you notice leaking on your floor, you may need to replace the door mullion. A faulty mullion can gather moisture, resulting in a leak. To replace the mullion, simply disconnect the old mullion from the wire harness and unscrew it. Re-attach the wire harness to the mullion and screw it back into place.

Door gasket - gray - right side (refrigerator door gasket, right)

This door gasket is used to make an air-tight seal for the cabinet when the door is closed to prevent warm air from entering the refrigerator. The gasket is gray in color and made of rubber. If your refrigerator is too warm, has frost build up, or the gasket is torn, you may need to replace the door gasket because the refrigerator will need to work harder to cool down. This is a genuine OEM part.

Plastic tube - 5/16 inch (refrigerator water tubing)

The 5/16” plastic water tubing attaches to the water inlet valve and goes into the refrigerator. The tubing supplies water to the water dispenser and the ice maker. If the tubing becomes damaged or cracked, it can cause water to leak out onto the floor and the water tubing will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power and water supply before starting the repair.

Bottom door bin (refrigerator door bin)

The door bin is attached to the inside of the refrigerator door, and typically holds condiments, jars, and bottles. This OEM basket assembly is made of white and clear plastic. Measures approximately 16 inches long x 4 1/2 inches high x 5 inches deep. These parts should fit tightly to the door of your refrigerator, if yours is loose you should replace it immediately, as it could result in its contents spilling into the inside of your refrigerator, or onto the floor.

Door shelf bin (refrigerator door bin)

This door bin is made of white plastic, attaches to the inside of the refrigerator door, and typically holds condiments, jars, and bottles. This door basket measures approximately 14 inches wide x 11 inches high x 4 inches deep. To replace your faulty or damaged basket, simply remove it from the door, and slide the new one in place.

Ice maker assembly - 6 wire (refrigerator ice maker)

NOTE: As per manufacture the secondary (smaller) wire connector has 6 wires in it. If original ice maker has 3 wire connector see part number PS7788172. Please verify connector before ordering.

Water inlet valve assembly (refrigerator water inlet valve)

This includes the primary and secondary valves along with the wire harness.

Glass shelf (refrigerator glass shelf)

This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken, this part is the appropriate replacement. Many of our customers have described this repair as easy. To complete the repair, carefully remove the old glass from the frame and replace it with the new pane of glass. This part is sold individually and is an authentic OEM part.

Left side connector rail (refrigerator freezer basket support rail, left)

Door gasket - gray - left side (refrigerator door gasket, left)

Spring,lever (refrigerator dispenser ice chute door hinge spring)

Refrigerator door bin assembly (refrigerator door bin)

Refrigerator water reservoir

The water reservoir holds the water for the water dispenser as the water chills.

Basket assembly,door (refrigerator door bin)

Bucket assembly,ice (refrigerator ice container assembly)