79574023412 Kenmore Refrigerator Parts List

Handle screw (refrigerator door handle mounting bolt)

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.

Door basket assembly (refrigerator door bin)

Refrigerator door bin AAP73252202 is an original equipment manufacturer (OEM) part that fits some Kenmore Elite bottom-freezer refrigerators in the following series: 7957204, 7957205, 7957209, 7957218, 7957248, 7957311, 7957315, 7957401, 7957402, 7957404, 7957409, 7957504, 7957998 and 7957999. Also fits some LG bottom-freezer refrigerators in series LFX25991, LFX31925, LFX31935, LFX33975 and LMX31985. This door bin has an irregular shape?it's 13-1/2 inches wide, 9-1/2 inches deep on the left, 10-1/8 inches deep on the right and 4-1/4 inches tall. To install door bin AAP73252202, slide it into the door just above desired location and push down on the bin until it snaps into place.

Basket assembly,door (refrigerator door bin)

Glass shelf (refrigerator glass shelf)

This glass shelf provides storage space in your refrigerator above the crisper. Shelves can crack and chip due to frequent use, and should be replaced immediately if cracks start to appear. This shelf measures approximately 30.5 inches wide by 15 inches deep and is for LG refrigerators. Replacing a damaged shelf is easy, carefully remove the faulty shelf and install the new one. Be sure to wear protective gloves if the existing shelf is cracked or broken.

Door holder (refrigerator door closer)

This is a manufacturer-approved refrigerator door closure for your refrigerator. It is made of white plastic and measures approximately 3 inches by 2 inches. If your old closure is damaged, your refrigerator door may not open and shut properly, and therefore it should be replaced.

Left side connector rail (refrigerator freezer basket support rail, left)

Refrigerator ice maker

The ice maker includes the ice mold and the control device. The ice maker receives water from the water inlet valve and then holds the water in the ice mold until the water freezes solid.

Refrigerator water reservoir

The water reservoir holds the water for the water dispenser as the water chills.

Gasket,door (refrigerator freezer door gasket)

Freezer door gasket is on the inner door panel and creates a seal around the door to prevent warm air from entering the freezer compartment.

Evaporator fan motor (refrigerator evaporator fan motor)

Gasket assembly,door (refrigerator door gasket, right)

Elbow (refrigerator water tube fitting)

Water inlet valve (refrigerator water inlet valve)

Switch,micro (refrigerator dispenser switch)

Motor assembly,dc (refrigerator evaporator fan motor assembly)

Evaporator fan motor circulates air through the fresh food compartment for efficient cooling.