79680021900 Parts List

1-15 of 66

Drum support roller and axle (roller assembly)

This part is used to hold the drum in place in the cabinet while letting the drum rotate on the support rollers. If your dryer is noisy, will not tumble, or is making loud squeaking noises, you may need to replace the drum support roller. It is recommended that you replace both rollers at once. This part is about 3 inches wide, comes with a bearing, roller shaft, and mounting clips. Sold Individually.

Easy Part #:

EAP8260240

Availability:

In Stock - Ships Today

Price:

$28.33

Lint filter (filter assembly)

The lint filter has a felt strip and is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry you may need to replace the filter. This is a genuine OEM part.

Easy Part #:

EAP3527578

Availability:

In Stock - Ships Today

Price:

$34.99

Drum roller (roller assembly)

The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. If the dryer is noisy, won’t tumble, or takes too long to dry, you might need to replace the support roller. It is recommended that you replace both rollers at once. The bearing inside this roller is self-lubricating, so no grease will be required. Please remember to disconnect the power to your appliance before starting your repair. This is a genuine OEM part.

Easy Part #:

EAP7321740

Availability:

In Stock - Ships Today

Price:

$9.41

Belt,poly v (belt)

The drive belt is made to wrap around the drum, working with the tension pulley to rotate the drum. If your dryer drum will not turn, then you may need to replace your belt. This drive belt is 1/4-inch wide with 4 ribs and 3 grooves. It is recommended to disconnect the power to your dryer before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:

EAP11705916

Availability:

In Stock - Ships Today

Price:

$19.77

Thermal fuse (thermostat)

The high limit thermostat protects the dryer by shutting off the heating element when the dryer overheats. If the thermostat has blown, dryer won’t start or there is no heat, the thermostat will need to be replaced it can not be reset. If your dryer vent is clogged it could cause the thermostat to blow as well. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting the repair.

Easy Part #:

EAP3530485

Availability:

In Stock - Ships Today

Price:

$12.26

Sensor

The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance correctly, it is suggested to check the moisture sensor bar for damage. A damaged sensor can cause the automatic drying cycle to not work properly and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting this repair.

Easy Part #:

EAP3529161

Availability:

In Stock - Ships Today

Price:

$5.95

Lint filter guide cover (cover,guide)

The lint filter grille cover is used to help keep clothes away from the exhaust air duct and keep the lint screen housing inside of the dryer. If the grille cover becomes cracked or damaged or your clothes are getting caught, you may need to replace the grille cover. This part measures approximately 16” long and 6 1/2” height. The grille cover is gray in color and made of plastic. This is a genuine OEM part.

Easy Part #:

EAP3519694

Availability:

In Stock - Ships Today

Price:

$21.99

Heating element assembly (heater assembly)

They are all strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer

Easy Part #:

EAP3527791

Availability:

In Stock - Ships Today

Price:

$143.47

Blower thermostat

The blower housing exhaust thermostat works in conjunction with your dryer by helping to regulate the temperature inside of the dryer drum. The thermostat will turn the heat off and on to help maintain the required temperature in the drum. If your dryer is not heating the thermostat may have shorted out and will need to be replaced. This is a genuine OEM part. Please remember to shut the power off to the dryer before starting the repair.

Easy Part #:

EAP8747887

Availability:

In Stock - Ships Today

Price:

$12.53

Thermistor,ntc (thermistor)

The thermistor, with wire harness, helps regulate and monitor the temperature inside of the dryer. The thermistor attaches onto the blower housing. If your dryer has a short drying time or a fault code is flashing, the thermistor maybe defective and will need to be replaced. Please remember to disconnect the power to the dryer before starting the repair. This is a genuine OEM part.

Easy Part #:

EAP3529026

Availability:

In Stock - Ships Today

Price:

$18.78

Drive motor (dryer motor)

This motor works with the belt to drive your dryer's drum.

Easy Part #:

EAP3523290

Availability:

In Stock - Ships Today

Price:

$180.38

Easy Part #:

EAP3522851

Availability:

In Stock - Ships Today

Price:

$26.66

Easy Part #:

EAP3575086

Availability:

In Stock - Ships Today

Price:

$76.95

Easy Part #:

EAP3524629

Availability:

In Stock - Ships Today

Price:

$12.44

Leg

This plastic adjustable dryer leg is used to support the weight and adjust the height of your dryer to keep it level. To install the leg, tip the dryer back and screw it into the bottom of your dryer unit. Please note that this dryer leg is sold individually.

Easy Part #:

EAP3523560

Availability:

In Stock - Ships Today

Price:

$4.64

1-15 of 66