970-C40052-00 Parts List

Door strike (door strike/catch for front-loading washing machine. The washer door must be latched shut in order for the washer to start.)

This is a door strike for your washing machine. It is the piece that activates the door switch once the door is closed. If your washer will not start, will not fill with water, or the door will not open/close you may need to replace the door strike. This part is white in color, made from plastic, and measures approximately 2 1/2 inches. This is a genuine OEM part.

Front load washer door lock and switch assembly (door lock & switch assembly)

Shock absorber kit (washing machine shock absorber kit. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, th)

The shock absorber kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin, and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during its cycles. If one or both of them break or wear out it will cause the washer to vibrate or shake and will need to be replaced. This kit is a genuine OEM part. Please remember to disconnect the power to your appliance before starting the repair.

Drain pump - 60hz 120v (washing machine drain pump. If the washer won't drain, the drain pump may be clogged, damaged, or defective.)

This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.

Single spring with insulators (spring assembly with insulators)

Water inlet valve (water inlet valve. The water inlet valve opens to allow hot, cold or warm water to enter the washing machine.)

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. If your washer will not stop filling with water, is leaking, or will not fill with water, you may need to replace the water inlet valve. Please make sure to disconnect the power to your washer before you start your repair. This water inlet valve is a genuine OEM part.

Screw

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Drain hose (drain hose with 90 degree elbow. 90 inches (7-1/2 feet) long)

This part comes with a ninety degree elbow.

Screw (screw, pan head)

Sold individually.

Drive belt - 6 ribs (washing machine inner tub drive belt, 6 ribs.)

This is a drive belt for your washing machine. This part spins the basket in your appliance by connecting the drive motor to the drive system. You will need to replace the drive belt if your pumps are not spinning, your washer is not agitating, or you are noticing excess noise and/or a burning smell. This belt is black with six ribbings. To replace this part, you will need a Phillips screwdriver.

Drum vane (front load washer drum vane)

Also known as a Drum Baffle. Sold individually.

Tub-to-pump hose (this hose goes from the tup to the pump. It is designed to catch coins and other items that may fall out of pockets in the wash.)

Spin control board (waching mahcine spin control board assembly for a front load washers. If the washer does not spin then the control board may be defective.)

Used with front load washers.

Single shock mounting pin (shock absorber mounting pin)

The shock absorber mounting pin, also known as a locking pin, is used to hold the shock absorber in place. If your washer is shaking, moving, or making noises you may need to replace the pin. This part is white in color, made of plastic, measures 3 inches long, and is sold individually. Check your model to see how many are required for your model. Please remember to disconnect the power and water to the washer before starting the repair.

Inner tub with spider arm and shaft (washing machine inner tub with spider and shaft.)

The shaft is no longer available separately.