KitchenAid Dishwasher Parts
Find Your Appliance Parts

Search by part or model number

Need help finding your Model Number?

Why do we need your model number?

Every model has its own, specific solutions. If you go to a car mechanic they'll need to know the exact make and model of your car to find the right repair parts. Appliances are the same. See this guide for help.

KitchenAid Dishwasher Parts

Dishwasher Lower Dishrack Wheel Assembly - Gray

(15)

Part Number: W10195416V

This is an authentic OEM replacement part that has been sourced directly from the manufacturer and is designed for use with a variety of dishwashers manufactured by KitchenAid, Whirlpool, Maytag, Kenmore, Jenn-Air, and Amana. For full compatibility, please see the "Model Cross Reference List" below. The purpose of this part is to allow the lower dishrack to roll back and forth on the rails easily. If your dishrack no longer glides smoothly, or if your Wheel Assembly is visibly damaged, it needs to be replaced. Each Assembly is sold individually (to replace both sides, you will need to order four assemblies)

Easy Part #:

EAP11722152

Availability:

In Stock

Your price

$23.20

Door Balance Link Kit

(6)

Part Number: 8194001

The door balance kit helps support the weight of the dishwasher door while it opens and closes. If the spring to the door is damaged/broken or the door is not opening and closing properly you will need to replace this part. This door kit includes 2 door balance links and 2 door balance mounts with wheels for the left and right side of the door. This is a genuine OEM part.

Easy Part #:

EAP972325

Availability:

In Stock

Your price

$21.28

Mounting Bracket

(1)

Part Number: WP8269145

The mounting bracket is used to attach the dishwasher to the underside of the counter. The mounting bracket holds the dishwasher in place to keep it from moving during cycles and to keep the dishwasher level. The bracket is made of metal and is approximately 3” in length. The screws are not included with the bracket, they must be ordered separately. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the dishwasher before starting the repair.

Easy Part #:

EAP11745496

Availability:

In Stock

Your price

$8.16

Dishwasher Dish Rack Adjuster Kit - Left and Right Side

(18)

Part Number: W10712394

The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.This is a genuine OEM part.

Easy Part #:

EAP10064063

Availability:

In Stock

Your price

$35.86

Rubber Washer

Part Number: WP717273

The black heating element washer goes between the heating element and the dishwasher tub to form a seal where the element attaches to prevent water from leaking during its cycle. If the washer goes bad it will cause water to leak out on to the floor. This part is made of rubber, measures approximately 1” in diameter and is sold individually. This is a genuine OEM part.

Easy Part #:

EAP11743934

Availability:

In Stock

Your price

$5.07

Tine Pivot

(3)

Part Number: WPW10082853

This tine pivot clip helps hold the tine row in place on your dish rack. If your clip is broken or cracked, you should replace it. This clip is made from plastic and is a genuine OEM part. It is sold individually.

Easy Part #:

EAP11748190

Availability:

In Stock

Your price

$6.00

Rack Track Stop

Part Number: WP8565925

This gray rack track stop is used for your upper dish rack track to prevent the rack from sliding off the slide rail. If your rack is falling off the track, you may need to replace the track stop. This is a genuine OEM part and is sold individually.

Easy Part #:

EAP11746591

Availability:

In Stock

Your price

$5.29

Dishwasher Chopper Assembly

(2)

Part Number: W10083957V

This part chops up/mince the food particles to prevent from clogging the dishwasher pump. This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing draining problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.

Easy Part #:

EAP11722146

Availability:

In Stock

Your price

$19.60

Rack Stop Clip

(4)

Part Number: WPW10195622

This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually.

Easy Part #:

EAP11750071

Availability:

In Stock

Your price

$5.41

Dishwasher Drain Pump

Part Number: WPW10348269

This drain pump (120V 60Hz) is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the body is cracked, causing leakage. To prevent this from happening, replace the drain pump. The tools needed for this installation are: Phillips screwdriver, 5/16 inch nut driver, 5/8 inch wrench, and a flathead screwdriver. Remember to unplug your dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.

Easy Part #:

EAP11753379

Availability:

In Stock

Your price

$55.38